Cope Engineering

Manchester, United Kingdom

We are offering ring lehr rolls. Very high surface hardnesslow thermal conductivitymade in rings to allow air circulationhigh temperature stability (500 c +)long life capabilityhigh wear resistancesome existing rolls can be retro-fittedspecial design compensates for steel thermal expansion

We are offering Application: Winding and re-winding machines Capacity: Turning up to 15 m in length and 1.3 m in diameter. Up to 15 Tonnes

We are offering paper machinery - felt rolls. Cope engineering specialize in the manufacture of rollers for the paper, coating and converting industry. We manufacture rolls up to 1350 mm in diameter and up to 15000 mm in overall length. Our expertise involves in the manufacturing of : . Winding drums. Felt rolls . Carbon fibre rolls. Steamoilwater heated rolls . Grooved rolls . Guide rolls . Press rolls . Breast rolls . Calendar rolls . Chill drums. Coating rolls. Embossing rolls. Nip rolls . Surface finish with chrome plating, nickel plating, rubber covered and ceramic coated furthermore we also undertake refurbishment of rolls. I am sure our capabilities will be of interest to you.

We are offering hydraulic barrel rods, cylinders and shafts. Cope engineering specialize in providing engineering solutions for the hydraulics industry. Cope engineering is capable of supplying complete (including chrome plate) piston rods piston rams hydraulic dampers plunger tubes rams barrels or accepting them as free issue material. we at cope engineering have the machining capacity in turing up to 1350mm in diameter and up to 15000 mm in overall length grinding up to 9300 mm (longer possible with discussion) milling up to 6000 mm boring drill and tap the end plates

We provide dynamic balancing. check balancing (dynamic / static) up to g1 grade balancing from 10kg (20 lbs) to 7500kg (16800 lbs) up to 2100 mm diameter 12000 mm in length.

We are offering carbon fibre and glass fibre tubes. From 50 mm in diameter up to 1.5 metres in diameter - utilising an extensive range of resin and fibre systems including : epoxy, polyester, glass fibre and carbon fibre

We are offering heat transfer roll, guaranteed performance uniform temperature to +- 0.5 c across webimproved product qualityincreased productivityreduced flow ratesreduced energy consumption.

We provide mirror polishing. chrome plated roll ground 0.2 ra further polished (mirror finish) 0.012 ra grinding: up to 1060 mm in diameter and 9300 mm in length polishing: up to 1000 mm in diameter and 5000 mm in length.

We are offering drive shafts. Cope engineering provides a range of general engineering and machining services for several industries. our expertise and capacity involves in the machining of : pump shaftsdrive shafts propeller shafts pump impeller shafts knife shafts arbour shafts power transmission spacers agitator shafts we at cope engineering have the machining capacity in turing up to 1350mm in diameter and up to 15000 mm in overall length grinding up to 9300 mm (longer possible with discussion) milling up to 6000 mm boring drill and tap the end plates

We provide ceramic coating. pkx02 is a finely textured coating for application to rollers, cylinders or flat surfaces. the coating has two components. the first is a bond coat of a dense, hard, high friction material and the second is a silicone based polymer impregnant. no finishing is usually required. pmx02 is offered as an alternative to ptfe, teflon and fep type release coatings where there is a specificrequirement for enhanced wear resistance against abrasive film products, better grip for drawing, tensioningor haul-off applications and /or improved release when handling high-tack or adhesive coated products. it should also be considered as a viable alternative to a silicone rubber roll covering. the release capability will not be dissimilar but service life will be greatly improved. pkx02 is pressure resistant and will not easily become marked or indented. environmentally, pkx02 has been shown to reduce noise output associated with 2peeling2 of adhesive coated film and strip from roller surfaces. this is attributed to the much improved release characteristic of the silicone impregnant. this is a particularly relevant feature on multiple slitting lines, where noise output is often a major problem. technical specification typical thickness.0.004 (0.1mm) surface finish.120-150 (3-3.75 microns) core temperature.ambient service temperature, continuous.280c service temperature, maximum.320c solvent resistance.all except aromatics cleaning.soapy water or solvent pkx02 is recommended to all producers and converters of plastic film and paper products, particularly where adhesive coatings are involved. applications include path line rolls, tensioning drums, draw rolls, coating cylinders and bottom slitter drums. the coating has also been used successfully to coat slitter knives, both multiple kiss-cut assemblies and single blades.

Capable of manufacturing grooved rollers and cylinders. cnc turning up to 1100 mm (43.3") dia. X 12000 mm (29' 4") between centres.Total 6-off machines

We are offering rubber covered roller. Surface finishing options on rolls include rubber covering