Our Products
The 60A switch mode step-down Battery Charger (E1199) that we engineer and supply to almost every part of the globe, is highly in demand. We are a manufacturer, exporter and supplier of 6xE911 10A charger with 90% efficiency that is ideally mounted on a single aluminum plate. The large unit set up in the United Kingdom, a team of talented professionals and supervisors help us achieve excellence in our product quality and attributes.
Graph Image
Specifications
Part No | E1199 |
---|---|
Type | Switch Mode Step Down Battery Charger |
Charging Current | 60 Amp |
Input Voltage | 18 – 30v Dc |
Output Voltage | 14v Dc |
Overload Protection | Yes |
Polarity Protected | External Fuse |
High Temp Protected | Yes |
Short Circuit Protection | External Fuse |
Efficiency | > 90% |
Dimensions | (4 Hole Fixing) |
Fixing Centres | 360mm X 360mm |
Hole Size | 6mm |
Weight | 3578g |
Construction | 6 X E911 10a Charger Mounted On a Single Aluminium Plate |
Control Input Voltage (cvin) | Charger Enabled: >26.5v Dc |
Control Input Voltage (cvin) | Charger Disabled: < 25v Dc |
Our 60 AMP Battery Charger (E1207) is a 6xE911 10 A charger which has been mounted on a single aluminum plate. We process our switch mode step up Battery Charger in 380mmx380mmx87mm. Our clients recommend our product owing to its 85% efficiency, both automatic and manual wiring, high temperature and short circuit protection fuse. We are the only manufacturer, exporter, and supplier dealing with Battery Chargers (E1207).
Wired As A Fully Automatic Battery Charger
Wired As A Manually Operated Battery Charger
Specifications
Part No | E1207 |
---|---|
Type | Switch Mode Step Up Battery Charger |
Charging Current | 60 Amp |
Input Voltage | 11 – 15v Dc |
Output Voltage | 28v Dc |
Overload Protection | External Fuse |
Polarity Protected | External Fuse |
High Temp Protected | Yes |
Short Circuit Protection | External Fuse |
Efficiency | > 85% |
Dimensions | 380mm X 380mm X 87mm |
Fixing Centres | 360mm X 360mm |
Hole Size | 6mm |
Weight | 4100g |
Construction | 6 X E911 10a Charger Mounted On a Single Aluminium Plate |
The range of Voltage Converter (E805-MK2) that we offer permits the towing of a 12V trailer by a 24V vehicle. Our design provides exceptional compatibility with vehicles in the presence as well as the absence of engine management systems. While the 24V battery serves as the main power source, the outputs are controlled by input lead voltage. Our product with 6 independent output circuits has an overload and short circuit protection. We are quite influential as manufacturers, exporters and suppliers in the United Kingdom.
Graph Image
Existing Vehicle Repairing
Specifications
Part No | E805-mk2 |
---|---|
Type | switch Mode Step Down Trailer Voltage Converter |
Input Voltage | 24v Dc |
Output Voltage | 12v Dc |
Max Cont. Output Power | 165 Watts |
Over Volt. Protection | Internal Fuse |
Short Circuit | Yes |
Thermal Shutdown | Yes |
Efficiency | > 80% |
Left Hand Part of Lighting System | 30w ( Rear Light, Side Lights, Reg.) |
Left Hand Flashlight | 21 Watt |
Stop Lights | 42 Watt |
Right Hand Part of Lighting System | 30w( Rear Light, Side Lights, Reg.) |
Right Hand Flashlight | 21 Watt |
Rear Fog Light | 42 Watt |
Weight | 570g |
Dimensions | 215mm X 71mm X 55mm |
Fixing Centres | 199mm X 40mm |
Hole Size | 4.5mm (4 Holes) |
Connections | Flying Leads |
Construction | Anodised Cooling Profile |
We are quite famed in the international market for being the manufacturer, exporter, and supplier of switch mode step up Voltage Converter (E622). Using building block system, we tend to obtain your power requirement. With an input voltage of 12 to 15V DC and the output voltage of 24V DC, the rating stands at 10 AMP and peak output current at 12 AMPS. We have really come a long way and are now a primary manufacturer, exporter, and supplier in the United Kingdom.
Graph Image
Specifications
Part No | E622 (avc12) |
---|---|
Type | Switch Mode Step Up Voltage Converter |
Rating | 10 Amp |
Max Continuous O/p | 10 Amps |
Peak Output Current | 12 Amps |
Input Voltage | 12 – 15v Dc |
Output Voltage | 24v Dc |
Overload Protection | External Fuse |
Output Protected | External Fuse |
Polarity Protected | Yes |
Operating Temperature | - 40 Deg.c to + 70 Deg.c |
High Temp Protected | Yes |
Short Circuit Protection | External Fuse |
Efficiency | > 85% |
Load Regulation | 0.3v |
Dimensions | 155mm X 70mm X 53mm |
Fixing Centres | 138mm X 40mm (4 Hole Fixing) |
Hole Size | 4.5mm |
Weight | 447g |
Construction | Anodised Cooling Profile |
We are a one stop destination in United Kingdom for products like Voltage Converter (E710). Our 15 AMP rating switch mode voltage dropper is available with an appropriate overload, polarity, and output protection. Furthermore, our converters are high temperature, over voltage and short circuit protected as well. With more and diverse technical specifications, we, as manufacturers, exporters and suppliers always strive to meet our client's expectations.
Graph Image
Specifications
Part No | E710 - Mod1 |
---|---|
Type | Switch Mode Voltage Dropper |
Rating | 15 Amp |
Max Continuous O/p | 15 Amp |
Peak Output Current | 20 Amp |
Input Voltage | 18 – 30v Dc |
Output Voltage | 13.5v Dc |
Overload Protection | Yes |
Output Protected | Yes |
Polarity Protected | Yes |
Operating Temperature | - 40 Deg.c to + 70 Deg.c |
High Temp Protected | Yes |
Over Voltage Protection | Yes |
Short Circuit Protection | Yes |
Efficiency | > 90% |
Load Regulation | 0.3v |
Dimensions | 155mm X 70mm X 53mm |
Fixing Centres | 138mm X 40mm (4 Hole Fixing) |
Hole Size | 4.5mm |
Weight | 447g |
Construction | Anodised Cooling Profile |
Our engineered Voltage Converter (E763) is the result of building block system that we utilize during the production process to get the entailed amount of power. Being Voltage Converter (E763) manufacturers, exporters, and suppliers of the United Kingdom, we bring forward an extraordinarily performing switch mode step up voltage converter with 7 AMP rating. Our well-equipped unit along with our highly skilled technicians & staff have helped us earn eminence.
Graph Image
Specifications
Part No | E763 |
---|---|
Type | Switch Mode Step Up Voltage Converter |
Rating | 7 Amp |
Max Continuous O/p | 7 Amp |
Peak Output Current | 10 Amp |
Input Voltage | 11 – 15v Dc |
Output Voltage | 28v Dc |
Overload Protection | External Fuse |
Output Protected | External Fuse |
Polarity Protected | Yes |
Operating Temperature | - 40 Deg.c to + 70 Deg.c |
High Temp Protected | Yes |
Short Circuit Protection | External Fuse |
Efficiency | > 85% |
Load Regulation | 0.2v |
Dimensions | 215mm X 71mm X 55mm |
Fixing Centres | 199mm X 40mm ( 4 Hole Fixing) |
Hole Size | 4.5mm |
Weight | 566g |
Construction | Anodised Cooling Profile |
Get maximum efficiency through our wide range of Voltage Converter (E774). Our product has a lot of striking features that make it a highly saleable product in the market. With 4 hole fixing center of 199mmx40mm, the Voltage Converter (E774) built with anodized cooling profile weighs 566g. We proficiently handle bulk orders and deliver them within specified time frame. Thus, we are considered to be extremely disciplined as manufacturers, exporters and suppliers from the United Kingdom.
Graph Image
Specifications
Part No | E774 |
---|---|
Type | Switch Mode Step Up Voltage Converter |
Rating | 5 Amp |
Max Continuous O/p | 5 Amp |
Peak Output Current | 7 Amp |
Input Voltage | 11 – 15v Dc |
Output Voltage | 36v Dc |
Overload Protection | External Fuse |
Output Protected | External Fuse |
Polarity Protected | Yes |
Operating Temperature | - 40 Deg.c to + 70 Deg.c |
High Temp Protected | Yes |
Short Circuit Protection | External Fuse |
Efficiency | > 80% |
Load Regulation | 0.1v |
Dimensions | 215mm X 71mm X 55mm |
Fixing Centres | 199mm X 40mm ( 4 Hole Fixing) |
Hole Size | 4.5mm |
Weight | 566g |
Construction | Anodised Cooling Profile |
The use of building block system in our Voltage Converter (E747) helps take out the required amount of power. As compared to other manufacturers, exporters, and suppliers from the United Kingdom, we stand out for our product excellence and performance. Our Voltage Converter (E747) weighs 570g and is processed with max continuous O/P current at 10 AMPS. Our product has over voltage protection, along with short circuit and high temperature protection as well.
Graph Image
Specifications
Part No | E747 |
---|---|
Type | Switch Mode Voltage Dropper |
Rating | 10 Amps |
Max Continuous O/p Current | 10 Amps |
Peak Output Current | 19 Amps |
Input Voltage | 48v Dc |
Output Voltage | 12v Dc |
Overload Protection | Yes |
Output Protected | Yes |
Polarity Protected | Yes |
Operating Temperature | - 40 Deg.c to + 70 Deg.c |
High Temp Protected | Yes |
Short Circuit Protection | Yes |
Over Voltage Protection | Yes |
Efficiency | > 90% |
Load Regulation | 0.3v |
Dimensions | 215mm X 70mm X 50mm |
Fixing Centres | 198mm X 40mm |
Hole Size | 4.5mm |
Weight | 570g |
Construction | Anodised Cooling Profile |
Being counted amongst the most important manufacturers, exporters and suppliers for Voltage Converters (E756) in the United Kingdom, has helped us become more proficient in our work. The switch mode voltage dropper with 48V DC input and 24V DC output voltage has a peak output current of 10 AMPS. Operating temperature of -40 to +70 deg c and load regulation of 0.3V. Our Voltage Converter (E756) with an anodized cooling profile has been designed in 215mmx70mmx50mm and has a hole size of 4.5mm.
Graph Image
Specifications
Part No | E756 |
---|---|
Type | Switch Mode Voltage Dropper |
Rating | 10 Amps |
Max Continuous O/p Current | 10 Amps |
Peak Output Current | 19 Amps |
Input Voltage | 48v Dc |
Output Voltage | 24v Dc |
Overload Protection | Yes |
Output Protected | Yes |
Polarity Protected | Yes |
Operating Temperature | - 40 Deg.c to + 70 Deg.c |
High Temp Protected | Yes |
Short Circuit Protection | Yes |
Over Voltage Protection | Yes |
Efficiency | > 90% |
Load Regulation | 0.3v |
Dimensions | 215mm X 70mm X 50mm |
Fixing Centres | 198mm X 40mm |
Hole Size | 4.5mm |
Weight | 570g |
Construction | Anodised Cooling Profile |
If you require a Voltage Converter (E956) then order from us. We are credited for being steadfast as manufacturers, exporters and suppliers in the United Kingdom. We innovatively create switch mode voltage dropper with anodized cooling profile and 4 hole fixing center of size 138mmx40mm. The operating temperature ranges from -40 to +70 deg c and the Voltage Converter (E956) is equipped with polarity protected external fuses.
Graph Image
Specifications
Part No | E956 |
---|---|
Type | Switch Mode Voltage Dropper |
Rating | 6 Amp |
Max Continuous O/p Current | 6 Amp |
Peak Output Current | > 8 Amp |
Input Voltage | 60v – 90v Dc |
Output Voltage | 12v |
Overload Protection | Yes |
Output Protected | Yes |
Polarity Protected | External Fuses |
Operating Temperature | - 40 Deg.c to + 70 Deg.c |
High Temp Protected | Yes |
Short Circuit Protection | Yes |
Over Voltage Protection | Yes |
Efficiency | > 90% |
Load Regulation | 0.3v |
Dimensions | 155mm X 70mm X 53mm |
Fixing Centres | 138mm X 40mm (4 Hole Fixing) |
Hole Size | 4.5mm |
Weight | 447g |
Construction | Anodised Cooling Profile |
Our anodized cooling profile constructed Voltage Converter (E817) has polarity protected external fuses with an operating temperature range of -40 to +70 deg c. Very few manufacturers, exporters and suppliers like us provide such great performing Voltage Converters (E817). Though we have established ourselves in the United Kingdom, but we cater to every corner of the globe with our cost-effective automotive electronic products. Our designs are polarity, over voltage and overload protected.
Graph Image
Specifications
Part No | E817 |
---|---|
Type | Switch Mode Voltage Dropper |
Rating | 6 Amp |
Max Continuous O/p Current | 6 Amp |
Peak Output Current | > 8 Amp |
Input Voltage | 60v – 90v Dc |
Output Voltage | 24v |
Overload Protection | Yes |
Output Protected | Yes |
Polarity Protected | External Fuses |
Operating Temperature | - 40 Deg.c to + 70 Deg.c |
High Temp Protected | Yes |
Short Circuit Protection | Yes |
Over Voltage Protection | Yes |
Efficiency | > 90% |
Load Regulation | 0.3v |
Dimensions | 155mm X 70mm X 53mm |
Fixing Centres | 138mm X 40mm (4 Hole Fixing) |
Hole Size | 4.5mm |
Weight | 447g |
Construction | Anodised Cooling Profile |
Order from us, the switch mode step up Voltage Converter (E752) with 0.1V load regulation and 5 AMP peak output current. We have a large network of global clients who appreciate our product features owing to which we have grown to be a leading name in the league of manufacturers, exporters and suppliers from the United Kingdom. An essential material used in the production is the building block system that serves as the source for getting power as per requirement.
Graph Image
Specifications
Part No | E752 |
---|---|
Type | Switch Mode Step Up Voltage Converter |
Rating | 3 Amp |
Max Continuous O/p Current | 3 Amp |
Peak Output Current | 5 Amp |
Input Voltage | 11v – 16v Dc |
Output Voltage | 48v Dc |
Overload Protection | External Fuse |
Output Protected | External Fuse |
Polarity Protected | Yes |
Operating Temperature | - 40 Deg.c to + 70 Deg.c |
High Temp Protected | Yes |
Short Circuit Protection | External Fuse |
Efficiency | > 88% |
Load Regulation | 0.1v |
Dimensions | 155mm X 71mm X 55mm |
Fixing Centres | 138mm X 40mm (4 Hole Fixing) |
Hole Size | 4.5mm |
Weight | 458g |
Construction | Anodised Cooling Profile |
A vast set of Electronic Flasher (E1121) that we present to you is equivalent to Danor Flasher 408834-3. It works best at a voltage of 24 V and our designs include varied connections and case styles. With a dimension of 74mmx61mmx36mm and 60 g weight, our PCB Plugin product is quite popular in the global market. Thus, we are highly trusted among the existing lot of manufacturers, exporters and suppliers from the United Kingdom.
Specifications
Part No | E1121 |
Description | Electronic Flasher |
Equivalent | Danor 408834-3 |
Specification | 3 + 1 X 21w |
Working Voltage | 24v |
Connections | Pin 1 = 30b |
Case style | Pin 2 = 49a |
Pin 3 = 49 | |
Pin 4 = +ve Feed to Stop Buzzer | |
Pin 5 = 31 | |
Pin 6 = C2 | |
Pin 7 = C | |
Pin 8 = Switched –ve to Stop | |
din Pack | |
Dimensions | 74mm X 61mm X 36mm |
Weight | 60g |
Fixing | Pcb Plug In |
Avail our Electronic Flasher (E1122) with 24V voltage and other distinctive features. These Electronic Flashers have direct equivalence to Danor Flashers 408838-9. As the United Kingdom-based manufacturers, exporters, and suppliers, we present a large range of Electronic Flashers (E1122) which can be conveniently fixed into a PCB plug. Nowhere will you find so many varieties of technical specifications being provided for a product of such fine quality.
Specifications
Part No | E1122 |
Description | Electronic Flasher |
Equivalent | Danor 408838-9 |
Specification | 2 + 1 X 21w + 1 X 10w |
Working Voltage | 24v |
Connections | Pin 1 = 30b |
Pin 2 = 49a | |
Pin 3 = 49 | |
Pin 4 = +ve Feed to Stop Buzzer | |
Pin 5 = 31 | |
Pin 6 = C2 | |
Pin 7 = C | |
Pin 8 = Switched –ve to Stop | |
Case style | Din Pack |
Dimensions | 74mm X 61mm X 36mm |
Weight | 60g |
Fixing | Pcb Plug In |
We fabricate Digital Speed Switch (E1047) is absolutely suitable for reversing cameras where the switching off speed functions as per the combination set up to 6 switches. This, provides 64 options ranging from 2.5km/h to 102.5 km/h. Mostly the switching off speed is properly set during its installation process and displays excellence in switching 10A. If you want a reliable manufacturer, exporter, and supplier in the United Kingdom, then approach us for your order.
Graph Image
Graph Image 2
Specifications
Output Current | 10A | |
Switch Off Delay (Speed Increasing) | 1 second | |
Switch On Delay (Speed Decreasing) | < 12ms | |
Switch point Setting (See Table) | 6 Way Switch (64 Combinations) |
|
Pulse Input | V low < 1.5V | |
V high > 5.5V | ||
Pulse Duration > 1.5ms | ||
Override Input Resistance | > 5kW to ground | |
Override Input | Open | Operation normal |
< 1V | Output On | |
> 4.5V | Output Off | |
Case Style | Din Pack, Vertical bracket | |
Dimensions | 94 x 61 x 45 mm | |
Weight | 85g | |
Fixing | 1 x 6.3mm Hole | |
Case Material | Black ABS | |
Bracket Material | Aluminium Alloy |
Ideal for Beacons and side cameras, our extensive array of Digital Speed Switch (E1048) has gained immense recognition amongst our esteemed clients. We process and deliver our products safely to every corner of the world through our fast delivery services. Thus, on account of consistency we have placed ourselves among the prominent manufacturers, exporters and suppliers in the United Kingdom. With the switching on speed being set during installation, the tri-state override input can control the output through open =normal operation, switch to positive= output on and switch to ground=output off.
Graph Image 1
Graph Image 2
Specifications
Output Current | 10A | |
Switch On Delay (Speed Increasing) | 1 second | |
Switch Off Delay (Speed Decreasing) | < 12ms | |
Switch point Setting (See Table) | 6 Way Switch (64 Combinations) |
|
Pulse Input | V low < 1.5V | |
V high > 5.5V | ||
Pulse Duration > 1.5ms | ||
Override Input Resistance | > 5kW to ground | |
Override Input | Open | Operation normal |
< 1V | Output Off | |
> 4.5V | Output On | |
Case Style | Din Pack, Vertical bracket | |
Dimensions | 94 x 61 x 45 mm | |
Weight | 85g | |
Fixing | 1 x 6.3mm Hole | |
Case Material | Black ABS | |
Bracket Material | Aluminium Alloy |
The Galvanic Isolators that we fabricate are used for fitting the earth lead that interrupts galvanic circuit in any form and is attached to the same point as DC on the boat. We are presently located in the United Kingdom and are very famous over there as manufacturers, exporters and suppliers of Galvanic Isolators. It displays higher efficiency when used with RCD protected shore power outlets ranging from 10 to 50 AMPS. Our fully sealed design of the Galvanic Isolators ideally matches EC/73/23/EEC, 89/336/EEC, and ISO13297.
Specifications
Part No | E936 |
---|---|
Working Voltage | Shorepower: 115v Ac / 230v Ac 50 – 60hz |
Shorepower Rating | Suitable for Use with Rcd Protected Shorepower Outlets from 10amps – 50 Amps |
Ac Current Rating | 50a Cont, 5kva for 20msec |
Temperature Rating | -40ºc to +70ºc |
Fixing | 4 Point Fixing (5mm Hole) |
Features | Fully Sealed Construction Conforms to Ec/73/23/eec, 89/336/eec, Iso13297 |
We are one of the most reputed Voltage Sensitive Switch (E1040) manufacturers, exporters, and suppliers in the United Kingdom. We design them for the maintenance of the cranking battery threshold voltage of 12.5, 13.5 V which leads to saving sufficient battery for starting the vehicle. The Voltage Sensitive Switch (E1040) also finds its usage in the higher range of power with an addition of a relay. Further, they are used as solid-state 1A relay.
Standard Wiring Diagram
Specifications
Part Number | E1040 |
---|---|
Description | Voltage Sensitive Switch |
Switch On information | The output switches On as the voltage rises and Off as the voltage falls. |
Supply Voltage (Vin) | 10V to 15V |
Output Current | 1A |
Sense (Switch On) Voltage, factory setting | 13.1V (voltage rising) |
Sense (Switch On) Voltage, Adjustment Range |
10.5V to 14.0V |
Sense Voltage Hysteresis | 200mV typical |
Supply current, below switch voltage |
< 1mA |
Supply Current, Above Switch Voltage, No Load | < 5mA |
Connections | Four Flying Leads Red = Supply positive Blue = Output Yellow = Sense Input Black = Sense negative / ground |
Physical Dimensions | 62 x 42 x 13mm |
Mountings | Single Ø 5mm Hole |
We are involved in dealing with Battery Chargers (E911) that charges a 24V battery from a 12V battery system. Our Battery Chargers (E911) is wired in either fully automatic form or is manually operated. With an efficiency of 85%, our product with 155mmx70mmx53mm has 4 hole fixing points with a dimension of 138mmx40mm. We are undoubtedly one of the most notable names in the group of Battery Charger (E911) manufacturers, exporters, and suppliers in the United Kingdom.
Graph Image 1
Graph Image 2
Specifications
Part No | E911 |
---|---|
Type | Switch Mode Step Up Battery Charger |
Charging Current | 10 Amp |
Input Voltage | 11 – 15v Dc |
Output Voltage | 28v Dc |
Overload Protection | External Fuse |
Polarity Protected | External Fuse |
High Temp Protected | Yes |
Short Circuit Protection | External Fuse |
Efficiency | > 85% |
Dimensions | 155mm X 70mm X 53mm |
Fixing Centres | 138mm X 40mm (4 Hole Fixing) |
Hole Size | 4.5mm |
Weight | 447g |
Construction | Construction |
As an eminent manufacturer, exporter and supplier in the United Kingdom, we innovatively engineer our Battery Charger (E932) with the help of building block system. This further helps in obtaining the power as per your specific requirement. We terminate the Leads as per specifications provided by our clients. Our construction involves anodized cooling profile with 90% efficiency and short circuit protection. Order now and we promise to deliver well on time.
Specifications
Part No | E932 |
---|---|
Type | Switch Mode Step Up Battery Charger |
Charging Current | 15 Amp |
Input Voltage | 18 – 30v Dc |
Output Voltage | 14v Dc |
Control Input Voltage (cvin) | Charger Enabled: >26.5v Dc Charger Disabled: < 25v Dc |
Overload Protection | Yes |
Polarity Protected | External Fuse |
High Temp Protected | Yes |
Short Circuit Protection | Yes |
Efficiency | > 90% |
Dimensions | 155mm X 70mm X 53mm |
Fixing Centres | 138mm X 40mm (4 Hole Fixing) |
Hole Size | 4mm |
Weight | 447g |
Construction | Anodised Cooling Profile |
Wired as fully automatic, our Battery Charger (E930) helps in controlling maximum charge while preventing it from getting damaged due to overcharging. If it is in manually operated mode, then the function is controlled when the charger is in switch on or off mode. We have the provision of offering charging indicator along with our product and to avail it kindly mention L to the number. Owing to our high utility Battery Charger (E930) and its varied specifications, we are highly praised as manufacturers, exporters and suppliers from the United Kingdom.
Wired As A Fully Automatic Battery Charger
Wired As A Manually Operated Battery Charger
Specifications
Part No. | E930 |
Type | Switch Mode Battery Charger |
Maximum Output (Charging) Current | 12A (PVin = 26V) |
Output Voltage (V-out) | 28.0V ± 0.1V |
Power Input Voltage (PVin) | 18V to 28V |
Control Input Voltage (CVin) | Charger Enabled: 26.5V |
Hysteresis | 1V |
Control Input Current | 50μA |
Battery Current Drain | 250μA (Charger Disabled) |
Overload Protection | yes |
Thermal shutdown | yes |
Polarity Protection | External Fuses Input = 15A / Output = 15A |
Connections | Flying leads |
Red = Positive Input | |
Black = Negative Input, Output and Control | |
Yellow = Positive Control | |
Blue = Positive Output | |
Physical Dimensions | 215 x 71 x 55mm |
Mountings | 4 x Ø 4.5mm Holes |
Hole Centres | 198 x 40mm |
Construction | Anodised Cooling Profile |
Usually, our Battery Charger (E1079) starts operating at the input voltage of 46 V and stops at 40V. The building block system that we use for the construction helps gain the power to meet all your necessities. With properties like overload, polarity, high temperature and short circuit protection, 90% efficiency, etc. our Battery Charger (E1079) is one of the best product designed by us. We have acquired a strong reputation as a manufacturer, exporter, and supplier from the United Kingdom.
Graph Image
Specifications
Part No | E1079 |
---|---|
Type | Switch Mode Step Down Battery Charger |
Charging Current | 10 Amp |
Peak Output Current Peak Output Current (vin = 48v): | > 18 Amp |
Input Voltage | 24v to 60v |
Output Voltage | 14v Dc |
Control Input Voltage (cvin) | Charger Enabled > 46v |
Control Input Voltage (cvin) | Charger Disabled < 40v |
Overload Protection | Yes |
Polarity Protected | External Fuse |
High Temp Protected | Yes |
Short Circuit Protection | Yes |
Efficiency | > 90% |
Dimensions | 215 X 71 X 55mm |
Fixing Centres | 199mm X 40mm (4 Hole Fixing) |
Hole Size | 4.5mm |
Weight | 475g |
Construction | Anodised Cooling Profile |