Other Products / Services #750287

Avon Metals handles the following forms of Silicon: - Silicon Metal Lumps - 441, 553, 2202, 3303 Grades Silicon Metal Powder - in a range of purities and mesh sizes (including AlSi powders) Aluminium-Silicon Master Alloys - 10%, 12%, 20%, 22%, 30%, 50% Si content Silicon Scrap - solar grade Silicon lumps, wafers

Avon Metals handles the following forms of Magnesium: - Magnesium Metal Ingots - 99.8% min Mg Magnesium Pebbles - 99.8% min Mg Magnesium Scrap - AM50, AM60, AZ91 Aluminium-Magnesium Master Alloys - 5%, 6%, 20% Mg content

The nickel-based superalloys have improved creep strength with the addition of rhenium. The alloys normally contain 3% or 6% of rhenium.[40] Second generation alloys contain 3%; these alloys were used in the engines of the F-16 and F-15, while the newer single-crystal third generation alloys contain 6% of rhenium; they are used in the F-22 and F-35 engines.[39][41] Rhenium is also used in the superalloys, such as CMSX-4 (2nd gen) and CMSX-10 (3rd gen) that are used in industrial gas turbine engines like the GE 7FA. Rhenium can cause superalloys to become microstructurally unstable, forming undesirable TCP (topologically close packed) phases. In 4th and 5th generation superalloys, ruthenium is used to avoid this effect. Among others the new superalloys are EPM-102 (with 3% Ru) and TMS-162 (with 6% Ru), both containing 6% rhenium, [42] as well as TMS-138[43] and TMS-174.[44][45]

Avon Metals handles the following forms of Tungsten: - Tungsten Metal Vacuum Grade (VG) - solids and turnings Tungsten Metal Airmelt Grade (AM) - solids and turnings Tungsten Carbide (WC) Scrap - Straight Grade Tungsten Carbide (WC) Scrap - Insert Grade Tungsten Carbide (WC) Scrap - TiC TaC Grade Tungsten Carbide Cobalt (WCCo) Scrap - PCB microdrills Densalloy Scrap - Copper free Mallory Scrap - 1000, 2000, 3000, 3925, 3950, 3970 Hevimet Scrap

Avon Metals handles the following forms of Primary Aluminium: - P1020 (99.7% min Al) Ingots - 0.10% max Si, 0.20% max Fe P0610 (88.85% min Al) Ingots - 0.05% max Si, 0.10% max Fe

Avon Metals handles the following forms of Titanium: - Titanium Sponge - TG90, TG100, TGTV grades in lump form (various sizes available) Titanium Sponge fines - various sizes available Ferro Titanium 70% - Eutectic Grade, lumps and fines (low Aluminium & other special varieties available) Titanium scrap - CP Grades 1, 2, 3, 4BT1-0, 6Al4V, 6-2-4-2, 6-2-4-6, 6-6-2, 8-1-1, 10-2-3 in solids, rivets and turnings Bulk Weldable and Feedstock Titanium - soilds Aluminium-Titanium master alloy - 5%, 6% and 10% Ti content in waffle and rod form Titanium-Aluminium 50:50 - sputtering target scrap

Avon Metals is an important trader of the following forms of Chromium: - Aluminothermic (AT) Chromium metal lumps - up to 99.4% purity High Purity Chromium Metal Double Degassed Briquettes (DDB) - 99.7% min. purity Electrolytic Chromium Flakes - degassed and undegassed - up to 4N (99.99%) purity excluding gases Low Carbon Ferro Chromium lumps - superalloy grade Chromium spent Sputtering Targets - 2N (99%) to 4N5 (99.995%) purity Chromium Powders - Aluminothermic and Electrolytic grades in a range of purities and mesh sizes Chromium-Aluminium & Aluminium-Chromium master alloys Chromium Carbide - Powder Chromium Oxides - Yellow (tanning), Green (pigments and glass)

Specification 97% min. Aluminium + Magnesium Copper 0.5% max. Magnesium 0.8% max. Silicon 0.8% max. Zinc 0.5% max. Physical Form 30 - 80 gram pebbles 5 kg Ingots Packaging Loose in bulk tipper bulk bags lidded drums

Avon Metals handles the following forms of Hafnium: - Hafnium Crystal Bar - with varying Zirconium contents from as low as 0.20% up to 3% Hafnium Ingot - Electron Beam Melted (EBM) Hafnium Sponge Hafnium Scrap - solids & turnings Hafnium Oxide

Avon Metals specialises in the following forms of Vanadium - > Pure Vanadium ingots - 99.5% min V and 99.9% min V > Pure Vanadium chips - 99.5% min V and 99.9% min V > Pure Vanadium scrap - solids, foil, sheet, turnings > Aluminium-Vanadium master alloys - AlV5%, AlV10% > Vanadium-Aluminium master alloys - V65%, V75%, V85% > Nickel-Vanadium master alloy - Ni93% V7%

Avon Metals specialises in the following forms of Niobium: - Niobium Electron Beam Melted (EBM) ingots - 99.8% min purity Niobium Sintered Bar - 99.6% min purity Niobium vacuum scrap - sputtering targets, sheet, plate, foil, turnings Niobium airmelt scrap - Niobium alloy scraps - NbTi, NbZr, NbAl

Avon Metals specialises in the following forms of Tantalum: - > Electron Beam melted (EBM) Tantalum ingots - from EICC approved sources > Electron Beam melted (EBM) Tantalum ingots - from recycled (scrap based) sources > Tantalum scrap for melting - solids, spent sputtering targets, turnings, sheet, capacitor pins, grey anodes > Tantalum scrap for refining - coloured anodes, top hats, TaW sludges ex-Rhenium recyclers, furnace parts, skulls > Tantalum alloys - TaW 9010, TaW 973 > Tantalum Oxide - Ta2O5