Seal Machines #3132634

This semi automatic system is simple to operate and is the next step up from a chamber machine. Used in conjunction with centre folded shrink film. The operator places the product into the shrink film, then moves the product across into the sealing area and the sealing bar is then manually lowered to make the heat seal. Once the sealing process has started the operator prepares the next product to be packaged. After the sealing process the sealing bar is automatically raised and the conveyor systems starts taking the product into the heat tunnel for shrinking.

an optional flexible conveyor can be added to manage the finished products exiting the heat tunnel.

the sealing time and the conveyor operating time can be adjusted on the l-sealer and the heat tunnel temperature is adjusted via the control panel.

this machine is a used machine that has undergone specialist service work and is ready to operate. All used machines are fully inspected, safety tested, cleaned down and serviced by our engineers in our workshops. For more information add this product to the inquiry cart or call our sales team.

the propac lst-500p semi automatic l-sealer with built in heat tunnel provides an all-in-one high output packaging solution. this semi automatic system is simple to operate and is the next step from a heat shrink chamber machine. used in conjunction with centre folded shrink film up to a roll size of 600mm wide. the operator places the product into the shrink film, then moves the product across into the sealing area, the sealing button is then pressed automatically operating the pneumatic heat sealing bar. once the sealing process has started the operator prepares the next product to be packaged. after the sealing process the sealing bar is automatically raised and the conveyor systems starts taking the product into the heat tunnel for shrinking. an optional flexible conveyor can be added to
manage the finished products exiting the heat tunnel. the sealing time and conveyor operating time can be adjusted on the l-sealer. a manual l-sealing mode can be used if a compressed air supply is unavailable. the heat tunnel temperature is adjusted via the digital control panel, conveyor speed can be adjusted to suit and the cool down cycle is activated by turning off the heaters.

these l-sealer and heat tunnel machines are highly versatile and can be used to shrink wrap a huge variety of different items for product presentation we recommend adding a propac fc-450 flexible conveyor to manage the shrink wrapped items exiting the heat tunnel.

The dem gp 4 apm pneumatic semi automatic l-sealer with built in heat tunnel provides an all-in-one high output packaging solution. This semi automatic system is simple to operate and is the next step from a chamber machine. Used in conjunction with centre folded shrink film up to a roll size of 600mm wide. The operator places the product into the shrink film, then moves the product across into the sealing area, the sealing button is then pressed automatically operating the pneumatic heat sealing bar. Once the sealing process has started the operator prepares the next product to be packaged. After the sealing process the sealing bar is automatically raised and the conveyor systems starts taking the product into the heat tunnel for shrinking. An optional flexible conveyor can be added to manage the finished products exiting the heat tunnel. The sealing time and conveyor operating time can be adjusted on the l-sealer. The heat tunnel temperature is adjusted via the digital control panel and conveyor speed can be adjusted to suit.

these l-sealer and heat tunnel machines are highly versatile and can be used to wrap a huge variety or different items for product presentation. Please see the following optional extras below to customise this machine to better suit your needs:

- propac fc-450 flexible conveyor
- dem short roller conveyor
- built in low noise air compressor (if air supply is unavailable)
- larger heat tunnel height from 200mm to 300mm
- teflon mesh belt for use with pe film
- narrow heat tunnel rollers for small or narrow products
- double reel film holders
- film unwind assistance
- air blown packing table for quicker product loading

The dem l711 mvre semi automatic l-sealer is heavy duty large size packaging solution that can be used for over-wrapping a wide range of larger products or can be setup with a separate heat tunnel for shrink wrapping products for presentation or transportation purposes. Used in conjunction with centre folded shrink film up to a roll size of 750mm wide. The operator places the product into the film, then moves the product across into the sealing area and the sealing bar is then manually lowered to make the heat seal. Once the sealing process has started the operator prepares the next product to be packaged. After the sealing process the sealing bar is raised and the conveyor systems starts moving the product away on to an optional conveyor or into stand alone heat tunnel. The sealing time, conveyor operating time and conveyor operating speed can be adjusted on the l-sealer.

The propac lst-550 semi automatic l-sealer with built in heat tunnel provides an all-in-one high output packaging solution. This semi automatic system is simple to operate and is the next step from a heat shrink chamber machine. Used in conjunction with centre folded shrink film up to a roll size of 600mm wide. The operator places the product into the shrink film, then moves the product across into the sealing area, the sealing bar is then manually lowered to make the heat seal. Once the sealing process has started the operator prepares the next product to be packaged. After the sealing process the sealing bar is automatically raised and the conveyor systems starts taking the product into the heat tunnel for shrinking. An optional flexible conveyor can be added to manage the finished products exiting the heat tunnel. The sealing time and the conveyor operating time can be adjusted on the l-sealer. The heat tunnel temperature is adjusted via the digital control panel, conveyor speed can be adjusted to suit and the cool down cycle is activated by turning off the heaters.

these l-sealer and heat tunnel machines are highly versatile and can be used to shrink wrap a huge variety of different items for product presentation we recommend adding a propac fc-450 flexible conveyor to manage the shrink wrapped items exiting the heat tunnel.