Flush Bottom Outlet Valve #1585739

Electric Actuated Stainless 2 Piece Ball Valve On Off :

• Overview - The stainless steel ball valve is designed for actuation with an integrallly cast ISO5211 actuator pad and suitable for general service applications. 2 Way 2 piece full bore stainless ball valve with BSP female treaded end connnections. Supplied fully assembled and dry bench function tested by J+J in Matlock, Derbyshire. A
• Function - J3C-S on-off smart electric actuators are designed for power to open and power to close. Stays put on external power failure. Designed to have power applied continuously.
• Sizing Criteria - J3CS Electrical on-off actuators have been sized on a wet service with a maximum pressure of 16 bar at max +70C. If your intended duty differs from this please contact us to confirm the correct actuated ball valve for your particular application.
• Options - Max +130C service using a mounting kit.

Electric Actuated Stainless 2 Piece Ball Valve Failsafe :

• Overview - The 2 piece stainless steel ball valve is designed for actuation with an integrallly cast ISO5211 actuator pad and suitable for a wide variety service applications. 2 Way full bore stainless ball valve with BSP female treaded end connnections. Supplied fully assembled and dry bench function tested by J+J in Matlock, Derbyshire.
• Function - J3C-S BSR smart failsafe electric actuators are designed for power to open and power to close, but fails to pre-determined position on external power failure using an internal battery. Designed to and must have power applied continuously.
• Sizing Criteria - J3CS Electrical failsafe actuators have been sized on a wet service with a maximum pressure of 16 bar at max +70C. If your intended duty differs from this please contact us to confirm the correct actuated ball valve for your particular application.
• Options - Can be configured fail open, or fail closed. Max +130C service using a mounting kit.

Electric Actuated Stainless 2 Piece Ball Valve Modulating :

• Overview - The stainless steel ball valve is designed for actuation with an integrallly cast ISO5211 actuator pad and suitable for general service applications. 2 Way 2 piece full bore stainlessball valve with BSP female treaded end connnections. Supplied fully assembled and dry bench function tested by J+J in Matlock, Derbyshire.
• Function - J3C-S DPS smart modulating electric actuators are designed to move proportional to an input control signal with power applied continuously. They provide an output signal as standard. Fails to pre-set position on loss of control signal, stays put on loss of external power.
• Sizing Criteria - J3CS Electrical modulating actuators have been sized on a wet service with a maximum pressure of 16 bar at max +70C. If your intended duty differs from this please contact us to confirm the correct actuated ball valve for your particular application.
• Options - Can be configured to stay put, fail open, or fail closed on loss of control signal. Stays put on loss of external power. Max +130C service using a mounting kit.

Electric Actuated Stainless 2 Piece Ball Valve Failsafe Modulating :

• Overview - The stainless steel ball valve is designed for actuation with an integrallly cast ISO5211 actuator pad and suitable for a wide range of service applications. 2 Way 2 piece full bore stainlessball valve with BSP female treaded end connnections. Supplied fully assembled and dry bench function tested by J+J in Matlock, Derbyshire.
• Function - J3C-S DPS BSR failsafe modulating smart electric actuators are designed to move proportional to an input control signal with power applied continuously. They provide an output signal as standard. Fails to pre-set position on loss of control signal, and on loss of external power.
• Sizing Criteria - J3CS Electrical failsafe modulating actuators have been sized on a wet service with a maximum pressure of 16 bar at max +70C. If your intended duty differs from this please contact us to confirm the correct actuated ball valve for your particular application.
• Options - Can be configured to stay put, fail open, or fail closed on loss of control signal. Can be configured to fail open, or fail closed on loss of external power. Max +130C service using a mounting kit.

Electric Actuated 6000psi Stainless Ball Valve On Off :

• Overview - Electrically actuated on-off reduced bore high pressure 6000psi stainless steel 3 piece ball valve, 2 way, ends BSPP,
• Function - The UK manufactured high pressure stainless steel ball valve is suitable for suitable service applications up to 6000psi and the J3C-S electric actuator is mounted using a stainless steel bracket and drive adapter. 2 Way block body 3 piece ball valve with BSPP female treaded end connnections. Supplied fully assembled and dry bench function tested by J+J in Matlock, Derbyshire.
• Sizing Criteria - J3CS Electrical on-off actuators have been sized on a wet service with a maximum pressure of 600psi at max +70C. If your intended duty differs from this please contact us to confirm the correct actuated ball valve for your particular application.
• Options - BSPT, NPT or compression ends.

Electric Actuated 6000psi Stainless Ball Valve Failsafe :

• Overview - The UK manufactured high pressure stainless steel ball valve is suitable for suitable service applications up to 6000psi and the J3C-S electric actuator is mounted using a stainless steel bracket and drive adapter. 2 Way block body 3 piece ball valve with BSPP female treaded end connnections. Supplied fully assembled and dry bench function tested by J+J in Matlock, Derbyshire.
• Function - J3C-S BSR smart failsafe electric actuators are designed for power to open and power to close, but fails to pre-determined position on external power failure using an internal battery. Designed to and must have power applied continuously.
• Sizing Criteria - J3CS Electrical failsafe actuators have been sized on a wet service with a maximum pressure of 6000psi at max +70C. If your intended duty differs from this please contact us to confirm the correct actuated ball valve for your particular application.
• Options - BSPT, NPT or compression ends. Can be configured fail open, or fail closed.

Electric Actuated 6000psi Stainless Ball Valve Modulating :

• Overview - The UK manufactured high pressure stainless steel ball valve is suitable for suitable service applications up to 6000psi and the J3C-S electric actuator is mounted using a stainless steel bracket and drive adapter. 2 Way block body 3 piece ball valve with BSPP female treaded end connnections. Supplied fully assembled and dry bench function tested by J+J in Matlock, Derbyshire.
• Function - J3C-S DPS smart modulating electric actuators are designed to move proportional to an input control signal with power applied continuously. They provide an output signal as standard. Fails to pre-set position on loss of control signal, stays put on loss of external power.
• Sizing Criteria - J3CS Electrical modulating actuators have been sized on a wet service with a maximum pressure of 600psi at max +70C. If your intended duty differs from this please contact us to confirm the correct actuated ball valve for your particular application.
• Options - BSPT, NPT or compression ends. Can be configured to stay put, fail open, or fail closed on loss of control signal. Stays put on loss of external power.

Electric Actuated 6000psi Stainless Ball Valve Failsafe Modulating :

• Overview - The UK manufactured high pressure stainless steel ball valve is suitable for suitable service applications up to 6000psi and the J3C-S electric actuator is mounted using a stainless steel bracket and drive adapter. 2 Way block body 3 piece ball valve with BSPP female treaded end connnections. Supplied fully assembled and dry bench function tested by J+J in Matlock, Derbyshire.
• Function - J3C-S DPS BSR failsafe modulating smart electric actuators are designed to move proportional to an input control signal with power applied continuously. They provide an output signal as standard. Fails to pre-set position on loss of control signal, and on loss of external power.
• Sizing Criteria - J3CS Electrical failsafe modulating actuators have been sized on a wet service with a maximum pressure of 600psi at max +70C. If your intended duty differs from this please contact us to confirm the correct actuated ball valve for your particular application.
• Options - BSPT, NPT or compression ends. Can be configured to stay put, fail open, or fail closed on loss of control signal. Can be configured to fail open, or fail closed on loss of external power.

Electric Actuated Stainless GE 2 Piece Ball Valve On Off :

• Overview - The stainless steel ball valve is designed for actuation with an integrallly cast ISO5211 actuator pad and suitable for general service applications. 2 Way 2 piece GE economy full bore stainless ball valve with BSP female treaded end connnections. Supplied fully assembled and dry bench function tested by J+J in Matlock, Derbyshire.
• Function - J3C-S on-off smart electric actuators are designed for power to open and power to close. Stays put on external power failure. Designed to have power applied continuously.
• Sizing Criteria - J3CS Electrical on-off actuators have been sized on a wet service with a maximum pressure of 16bar at max +70C. If your intended duty differs from this please contact us to confirm the correct actuated ball valve for your particular application.
• Options - Max +130C service using a mounting kit.

Electric Actuated Stainless GE 2 Piece Ball Valve Failsafe :

• Overview - The stainless steel ball valve is designed for actuation with an integrallly cast ISO5211 actuator pad and suitable for general service applications. 2 Way 2 piece GE economy full bore stainless ball valve with BSP female treaded end connnections. Supplied fully assembled and dry bench function tested by J+J in Matlock, Derbyshire.
• Function - J3C-S BSR smart failsafe electric actuators are designed for power to open and power to close, but fails to pre-determined position on external power failure using an internal battery. Designed to and must have power applied continuously.
• Sizing Criteria - J3CS Electrical failsafe actuators have been sized on a wet service with a maximum pressure of 16bar at max +70C. If your intended duty differs from this please contact us to confirm the correct actuated ball valve for your particular application.
• Options - Can be configured fail open, or fail closed. Max +130C service using a mounting kit.

Electric Actuated Stainless GE 2 Piece Ball Valve Modulating :

• Overview - The stainless steel ball valve is designed for actuation with an integrallly cast ISO5211 actuator pad and suitable for general service applications. 2 Way 2 piece GE economy full bore stainless ball valve with BSP female treaded end connnections. Supplied fully assembled and dry bench function tested by J+J in Matlock, Derbyshire.
• Function - J3C-S DPS smart modulating electric actuators are designed to move proportional to an input control signal with power applied continuously. They provide an output signal as standard. Fails to pre-set position on loss of control signal, stays put on loss of external power.
• Sizing Criteria - J3CS Electrical modulating actuators have been sized on a wet service with a maximum pressure of 16bar at max +70C. If your intended duty differs from this please contact us to confirm the correct actuated ball valve for your particular application.
• Options - Can be configured to stay put, fail open, or fail closed on loss of control signal. Stays put on loss of external power. Max +130C service using a mounting kit.

Electric Actuated Stainless GE 2 Piece Ball Valve Failsafe Modulating :

• Overview - The stainless steel ball valve is designed for actuation with an integrallly cast ISO5211 actuator pad and suitable for general service applications. 2 Way 2 piece GE economy full bore stainless ball valve with BSP female treaded end connnections. Supplied fully assembled and dry bench function tested by J+J in Matlock, Derbyshire.
• Function - J3C-S DPS BSR failsafe modulating smart electric actuators are designed to move proportional to an input control signal with power applied continuously. They provide an output signal as standard. Fails to pre-set position on loss of control signal, and on loss of external power.
• Sizing Criteria - J3CS Electrical failsafe modulating actuators have been sized on a wet service with a maximum pressure of 16bar at max +70C. If your intended duty differs from this please contact us to confirm the correct actuated ball valve for your particular application.
• Options - Can be configured to stay put, fail open, or fail closed on loss of control signal. Can be configured to fail open, or fail closed on loss of external power. Max +130C service using a mounting kit.

Electric Actuated Stainless Firesafe Ball Valve On Off :

• Overview - The 3 piece stainless steel anti-static and firesafe approved ball valve is designed for actuation with an integrallly cast ISO5211 actuator pad and suitable for a wide variety of service applications. 2 Way full bore stainless ball valve with BSP female threaded end connnections. Swing out centre section allows in line maintenance. Supplied fully assembled and dry bench function tested by J+J in Matlock, Derbyshire.
• Function - J3C-S on-off smart electric actuators are designed for power to open and power to close. Stays put on external power failure. Designed to and must have power applied continuously.
• Sizing Criteria - J3CS Electrical failsafe actuators have been sized on a wet service with a maximum pressure of 16bar at max +70C. If your intended duty differs from this please contact us to confirm the correct actuated ball valve for your particular application.
• Options - Socket or butt-weld ends. Max +130C service using a mounting kit.

Electric Actuated Stainless Firesafe Ball Valve Failsafe :

• Overview - The 3 piece stainless steel anti-static and firesafe approved ball valve is designed for actuation with an integrallly cast ISO5211 actuator pad and suitable for a wide variety of service applications. 2 Way full bore stainless ball valve with BSP female threaded end connnections. Swing out centre section allows in line maintenance. Supplied fully assembled and dry bench function tested by J+J in Matlock, Derbyshire.
• Function - J3C-S BSR smart failsafe electric actuators are designed for power to open and power to close, but fails to pre-determined position on external power failure using an internal battery. Designed to and must have power applied continuously.
• Sizing Criteria - J3CS Electrical failsafe actuators have been sized on a wet service with a maximum pressure of 16bar at max +70C. If your intended duty differs from this please contact us to confirm the correct actuated ball valve for your particular application.
• Options - Socket or butt-weld ends. Can be configured fail open, or fail closed. Max +130C service using a mounting kit.

Electric Actuated Stainless Firesafe Ball Valve Modulating :

• Overview - The 3 piece stainless steel anti-static and firesafe approved ball valve is designed for actuation with an integrallly cast ISO5211 actuator pad and suitable for a wide variety of service applications. 2 Way full bore stainless ball valve with BSP female threaded end connnections. Swing out centre section allows in line maintenance. Supplied fully assembled and dry bench function tested by J+J in Matlock, Derbyshire.
• Function - J3C-S DPS smart modulating electric actuators are designed to move proportional to an input control signal with power applied continuously. They provide an output signal as standard. Fails to pre-set position on loss of control signal, stays put on loss of external power.
• Sizing Criteria - J3CS Electrical modulating actuators have been sized on a wet service with a maximum pressure of 16bar at max +70C. If your intended duty differs from this please contact us to confirm the correct actuated ball valve for your particular application.
• Options - Socket or butt-weld ends. Can be configured to stay put, fail open, or fail closed on loss of control signal. Stays put on loss of external power. Max +130C service using a mounting kit.

Electric Actuated Stainless Firesafe Ball Valve Failsafe modulating :

• Overview - The 3 piece stainless steel anti-static and firesafe approved ball valve is designed for actuation with an integrallly cast ISO5211 actuator pad and suitable for a wide variety of service applications. 2 Way full bore stainless ball valve with BSP female threaded end connnections. Swing out centre section allows in line maintenance. Supplied fully assembled and dry bench function tested by J+J in Matlock, Derbyshire.
• Function - J3C-S DPS BSR failsafe modulating smart electric actuators are designed to move proportional to an input control signal with power applied continuously. They provide an output signal as standard. Fails to pre-set position on loss of control signal, and on loss of external power.
• Sizing Criteria - J3CS Electrical failsafe modulating actuators have been sized on a wet service with a maximum pressure of 16bar at max +70C. If your intended duty differs from this please contact us to confirm the correct actuated ball valve for your particular application.
• Options - Socket or butt-weld ends. Can be configured to stay put, fail open, or fail closed on loss of control signal. Can be configured to fail open, or fail closed on loss of external power. Max +130C service using a mounting kit.

Electric Actuated Stainless V Control Ball Valve On Off ;

• Overview - This full bore 3 piese stainless steel V control ball valve is designed to provide more accurate flow control compared to a standard ball valve in modulating applications. 2 Way ball valve with 30, 60 or 90 degree V-notched ball, reinforced PTFE seats and PTFE seals. BSP end connections (other options available). Supplied fully assembled and dry bench function tested by J+J in Matlock, Derbyshire.
• Function - J3C-S on-off smart electric actuators are designed for power to open and power to close. Stays put on external power failure. Designed to have power applied continuously.
• Sizing Criteria - J3CS Electrical on-off actuators have been sized on a wet service with a maximum pressure of 16bar at max +70C. If your intended duty differs from this please contact us to confirm the correct actuated ball valve for your particular application.
• Options - 30, 60 or 90 degree V ball. Socket or butt-weld ends. Max +130C service using a mounting kit.

Electric Actuated Stainless V Control Ball Valve Failsafe :

• Overview - This full bore 3 piese stainless steel V control ball valve is designed to provide more accurate flow control compared to a standard ball valve in modulating applications. 2 Way ball valve with 30, 60 or 90 degree V-notched ball, reinforced PTFE seats and PTFE seals. BSP end connections (other options available). Supplied fully assembled and dry bench function tested by J+J in Matlock, Derbyshire.
• Function - J3C-S BSR smart failsafe electric actuators are designed for power to open and power to close, but fails to pre-determined position on external power failure using an internal battery. Designed to have power applied continuously.
• Sizing Criteria - J3CS Electrical failsafe actuators have been sized on a wet service with a maximum pressure of 16bar at max +70C. If your intended duty differs from this please contact us to confirm the correct actuated ball valve for your particular application.
• Options - Can be configured fail open, or fail closed. 30, 60 or 90 degree V ball. Socket or butt-weld ends. Max +130C service using a mounting kit.

Electric Actuated Stainless V Control Ball Valve Modulating :

• Overview - This full bore 3 piese stainless steel V control ball valve is designed to provide more accurate flow control compared to a standard ball valve in modulating applications. 2 Way ball valve with 30, 60 or 90 degree V-notched ball, reinforced PTFE seats and PTFE seals. BSP end connections (other options available). Supplied fully assembled and dry bench function tested by J+J in Matlock, Derbyshire.
• Function - J3C-S DPS smart modulating electric actuators are designed to move proportional to an input control signal with power applied continuously. They provide an output signal as standard. Fails to pre-set position on loss of control signal, stays put on loss of external power.
• Sizing Criteria - J3CS Electrical modulating actuators have been sized on a wet service with a maximum pressure of 16bar at max +70C. If your intended duty differs from this please contact usto confirm the correct actuated ball valve for your particular application.
• Options - Can be configured to stay put, fail open, or fail closed on loss of control signal. Stays put on loss of external power. 30, 60 or 90 degree V ball. Socket or butt-weld ends. Max +130C service using a mounting kit.

Electric Actuated Stainless V Control Ball Valve Failsafe Modulating :

• Overview - This full bore 3 piese stainless steel V control ball valve is designed to provide more accurate flow control compared to a standard ball valve in modulating applications. 2 Way ball valve with 30, 60 or 90 degree V-notched ball, reinforced PTFE seats and PTFE seals. BSP end connections (other options available). Supplied fully assembled and dry bench function tested by J+J in Matlock, Derbyshire.
• Function - J3C-S DPS BSR failsafe modulating smart electric actuators are designed to move proportional to an input control signal with power applied continuously. They provide an output signal as standard. Fails to pre-set position on loss of control signal, and on loss of external power.
• Sizing Criteria - J3CS Electrical failsafe modulating actuators have been sized on a wet service with a maximum pressure of 16bar at max +70C. If your intended duty differs from this please contact us to confirm the correct actuated ball valve for your particular application.
• Options - Can be configured to stay put, fail open, or fail closed on loss of control signal. Can be configured to fail open, or fail closed on loss of external power. 30, 60 or 90 degree V ball. Socket or butt-weld ends. Max +130C service using a mounting kit.

Electric Actuated Stainless Hygienic Ball Valve On Off :

• Overview - This 3 piece stainless steel ball valve is designed for actuation with an integrallly cast ISO5211 actuator pad and suitable for a variety of hygienic or sanitary service applications. 2 Way ball valve with cavity filled PTFE seats and clamp type end connnections (opther options available). Swing out centre section allows in line maintenance. Supplied fully assembled and dry bench function tested by J+J in Matlock, Derbyshire.
• Function - J3C-S on-off smart electric actuators are designed for power to open and power to close. Stays put on external power failure. Designed to have power applied continuously.
• Sizing Criteria - J3CS Electrical on-off actuators have been sized on a wet service with a maximum pressure of 16bar at max +70C. If your intended duty differs from this please contact us to confirm the correct actuated ball valve for your particular application.
• Options - Imperial OD butt-weld or RJT ends. Max +100C service using a mounting kit.

Electric Actuated Stainless Hygienic Ball Valve failsafe :

• Overview - 3 Piece stainless steel ball valve designed for actuation with an integrallly cast ISO5211 actuator pad and suitable for a variety of hygienic or sanitary service applications. Electric 2 Way ball valve with cavity filled PTFE seats and tri-clamp type end connnections (opther options available). Swing out centre section allows in line maintenance. Supplied fully assembled and dry bench function tested by J+J in Matlock, Derbyshire.
• Function - J3C-S BSR smart failsafe electric actuators are designed for power to open and power to close, but fails to pre-determined position on external power failure using an internal battery. Designed to have power applied continuously.
• Sizing Criteria - J3CS Electrical failsafe actuators have been sized on a wet service with a maximum pressure of 16bar at max +70C. If your intended duty differs from this please contact us to confirm the correct actuated ball valve for your particular application.
• Options - Imperial OD butt-weld or RJT ends. Can be configured fail open, or fail closed. Max +100C service using a mounting kit.

Electric Actuated Stainless Hygienic Ball Valve Modulating :

• Overview - This 3 piece stainless steel ball valve is designed for actuation with an integrallly cast ISO5211 actuator pad and suitable for a variety of hygienic or sanitary service applications. 2 Way ball valve with cavity filled PTFE seats and clamp type end connnections (opther options available). Swing out centre section allows in line maintenance. Supplied fully assembled and dry bench function tested by J+J in Matlock, Derbyshire.
• Function - J3C-S DPS smart modulating electric actuators are designed to move proportional to an input control signal with power applied continuously. They provide an output signal as standard. Fails to pre-set position on loss of control signal, stays put on loss of external power.
• Sizing Criteria - J3CS Electrical modulating actuators have been sized on a wet service with a maximum pressure of 16bar at max +70C. If your intended duty differs from this please contact us to confirm the correct actuated ball valve for your particular application.
• Options - Imperial OD butt-weld or RJT ends. Can be configured to stay put, fail open, or fail closed on loss of control signal. Stays put on loss of external power. Max +130C service using a mounting kit.

Electric Actuated Stainless Hygienic Ball Valve Failsafe Modulating :

• Overview - This 3 piece stainless steel ball valve is designed for actuation with an integrallly cast ISO5211 actuator pad and suitable for a variety of hygienic or sanitary service applications. 2 Way ball valve with cavity filled PTFE seats and clamp type end connnections (opther options available). Swing out centre section allows in line maintenance. Supplied fully assembled and dry bench function tested by J+J in Matlock, Derbyshire.
• Function - J3C-S DPS BSR failsafe modulating smart electric actuators are designed to move proportional to an input control signal with power applied continuously. They provide an output signal as standard. Fails to pre-set position on loss of control signal, and on loss of external power.
• Sizing Criteria - J3CS Electrical failsafe modulating actuators have been sized on a wet service with a maximum pressure of 16bar at max +70C. If your intended duty differs from this please contact us to confirm the correct actuated ball valve for your particular application.
• Options - Imperial OD butt-weld or RJT ends. Can be configured to stay put, fail open, or fail closed on loss of control signal. Can be configured to fail open, or fail closed on loss of external power. Max +130C service using a mounting kit.

Electric Actuated Stainless GE 3 Piece Ball Valve On Off :

• Overview - This economy 3 piece stainless steel ball valve is designed for actuation with an integrallly cast ISO5211 actuator pad and suitable for wide variety of service applications. Economy 2 Way full bore stainless ball valve with BSP female treaded end connnections. Swing out centre section allows in line maintenance. Supplied fully assembled and dry bench function tested by J+J in Matlock, Derbyshire.
• Function - J3C-S on-off smart electric actuators are designed for power to open and power to close. Stays put on external power failure. Designed to have power applied continuously.
• Sizing Criteria - J3CS Electrical on-off actuators have been sized on a wet service with a maximum pressure of 16bar at max +70C. If your intended duty differs from this please contact us to confirm the correct actuated ball valve for your particular application.
• Options - Socket or butt-weld ends. Max +130C service using a mounting kit.

Electric Actuated Stainless GE 3 Piece Ball Valve Failsafe :

• Overview - This economy 3 piece stainless steel ball valve is designed for actuation with an integrallly cast ISO5211 actuator pad and suitable for wide variety of service applications. Economy 2 Way full bore stainless ball valve with BSP female treaded end connnections. Swing out centre section allows in line maintenance. Supplied fully assembled and dry bench function tested by J+J in Matlock, Derbyshire.
• Function - J3C-S BSR smart failsafe electric actuators are designed for power to open and power to close, but fails to pre-determined position on external power failure using an internal battery. Designed to have power applied continuously.
• Sizing Criteria - J3CS Electrical failsafe actuators have been sized on a wet service with a maximum pressure of 16bar at max +70C. If your intended duty differs from this please contact us to confirm the correct actuated ball valve for your particular application.
• Options - Socket or butt-weld ends. Can be configured fail open, or fail closed. Max +130C service using a mounting kit.

Electric Actuated Stainless GE 3 Piece Ball Valve Modulating :

• Overview - This economy 3 piece stainless steel ball valve is designed for actuation with an integrallly cast ISO5211 actuator pad and suitable for wide variety of service applications. Economy 2 Way full bore stainless ball valve with BSP female treaded end connnections. Swing out centre section allows in line maintenance. Supplied fully assembled and dry bench function tested by J+J in Matlock, Derbyshire.
• Function - J3C-S DPS smart modulating electric actuators are designed to move proportional to an input control signal with power applied continuously. They provide an output signal as standard. Fails to pre-set position on loss of control signal, stays put on loss of external power.
• Sizing Criteria - J3CS Electrical modulating actuators have been sized on a wet service with a maximum pressure of 16bar at max +70C. If your intended duty differs from this please contact us to confirm the correct actuated ball valve for your particular application.
• Options - Socket or butt-weld ends. Can be configured to stay put, fail open, or fail closed on loss of control signal. Stays put on loss of external power. Max +130C service using a mounting kit.

Electric Actuated Stainless GE 3 Piece Ball Valve Failsafe Modulating :

• actuator pad and suitable for wide variety of service applications. Economy 2 Way full bore stainless ball valve with BSP female treaded end connnections. Swing out centre section allows in line maintenance. Supplied fully assembled and dry bench function tested by J+J in Matlock, Derbyshire.
• Function - J3C-S DPS BSR failsafe modulating smart electric actuators are designed to move proportional to an input control signal with power applied continuously. They provide an output signal as standard. Fails to pre-set position on loss of control signal, and on loss of external power.
• Sizing Criteria - J3CS Electrical failsafe modulating actuators have been sized on a wet service with a maximum pressure of 16bar at max +70C. If your intended duty differs from this please contact us to confirm the correct actuated ball valve for your particular application.
• Options - Socket or butt-weld ends. Can be configured to stay put, fail open, or fail closed on loss of control signal. Can be configured to fail open, or fail closed on loss of external power. Max +130C service using a mounting kit.