J+J Automation UK Limited

England, United Kingdom

Electric Actuated Brass Economy 2 Way ball Valve On Off :

• Overview - The brass ball valve is designed for actuation with an integrallly cast ISO5211 actuator pad and suitable for general service applications. 2 Way full bore brass ball valve with BSP female treaded end connnections. Supplied fully assembled and dry bench function tested by J+J in Matlock, Derbyshire.
• Function - J3C-S on-off smart electric actuators are designed for power to open and power to close. Stays put on external power failure. Designed to and must have power applied continuously.
• Sizing Criteria - J3CS Electrical on-off actuators have been sized on a wet service with a maximum pressure of 16 bar at max +70C. If your intended duty differs from this please contact us to confirm the correct actuated ball valve for your particular application.
• Options - Max +100C service using a mounting kit.

Electric Actuated Brass Economy 2 Way ball Valve Failsafe :

• Overview - The brass ball valve is designed for actuation with an integrallly cast ISO5211 actuator pad and suitable for general service applications. 2 Way full bore brass ball valve with BSP female treaded end connnections. Supplied fully assembled and dry bench function tested by J+J in Matlock, Derbyshire.
• Function - J3C-S BSR smart failsafe electric actuators are designed for power to open and power to close, but fails to pre-determined position on external power failure using an internal battery. Designed to, and must have power applied continuously.
• Sizing Criteria - J3CS Electrical failsafe actuators have been sized on a wet service with a maximum pressure of 16 bar at max +70C. If your intended duty differs from this please contact us to confirm the correct actuated ball valve for your particular application.
• Options - Can be configured fail open, or fail closed. Max +100C service using a mounting kit.

Electric Actuated Brass Economy 2 Way ball Valve Modulating :

• Overview - The brass ball valve is designed for actuation with an integrallly cast ISO5211 actuator pad and suitable for general service applications. 2 Way full bore brass ball valve with BSP female treaded end connnections. Supplied fully assembled and dry bench function tested by J+J in Matlock, Derbyshire.
• Function - J3C-S DPS smart modulating electric actuators are designed to move proportional to an input control signal with power applied continuously. They provide an output signal as standard. Fails to pre-set position on loss of control signal, stays put on loss of external power.
• Sizing Criteria - J3CS Electrical modulating actuators have been sized on a wet service with a maximum pressure of 16 bar at max +70C. If your intended duty differs from this please contact us to confirm the correct actuated ball valve for your particular application.

• Options :
  • Can be configured to stay put, fail open, or fail closed on loss of control signal.
  • Stays put on loss of external power.
  • Max +100C service using a mounting kit.

Electric Actuated Brass Economy 2 Way ball Valve Failsafe modulating :

• Overview - The brass ball valve is designed for actuation with an integrallly cast ISO5211 actuator pad and suitable for general service applications. 2 Way full bore brass ball valve with BSP female treaded end connnections. Supplied fully assembled and dry bench function tested by J+J in Matlock, Derbyshire.
• Function - J3C-S DPS BSR failsafe modulating smart electric actuators are designed to move proportional to an input control signal with power applied continuously. They provide an output signal as standard. Fails to pre-set position on loss of control signal, and on loss of external power.
• Sizing Criteria - J3CS Electrical failsafe modulating actuators have been sized on a wet service with a maximum pressure of 16 bar at max +70C. If your intended duty differs from this please contact us to confirm the correct actuated ball valve for your particular application.

• Options :
  • Can be configured to stay put, fail open, or fail closed on loss of control signal.
  • Can be configured to fail open, or fail closed on loss of external power.
  • Max +100C service using a mounting kit.

Electric atuated Brass 2 Way WRAS Ball Valve On-Off :

• Overview: All EU content actuated ball valve package. The brass ball valve is approved for use on drinking water by WRAS in the UK and designed for actuation with an integrallly cast ISO5211 actuator pad. 2 Way brass ball valve with BSP female treaded end connnections. Supplied fully assembled and dry bench function tested by J+J in Matlock, Derbyshire.
• Function: J3C-S on-off smart electric actuators are designed for power to open and power to close. Stays put on external power failure. Designed to, and must have power applied continuously.
• Sizing Criteria: J3CS Electrical on-off actuators have been sized on a wet service with a maximum pressure of 16 bar at max +70C. If your intended duty differs from this please contact us to confirm the correct actuated ball valve for your particular application.
• Options: Max +95C service using a mounting kit.

Electric atuated Brass 2 Way WRAS Ball Valve Failsafe :

• Overview: All EU content actuated ball valve package. The brass ball valve is approved for use on drinking water by WRAS in the UK and designed for actuation with an integrallly cast ISO5211 actuator pad. 2 Way brass ball valve with BSP female treaded end connnections. Supplied fully assembled and dry bench function tested by J+J in Matlock, Derbyshire.
• Function: J3C-S BSR smart failsafe electric actuators are designed for power to open and power to close, but fails to pre-determined position on external power failure using an internal battery. Designed to, and must have power applied continuously.
• Sizing Criteria: J3CS Electrical failsafe actuators have been sized on a wet service with a maximum pressure of 16 bar at max +70C. If your intended duty differs from this please contact us to confirm the correct actuated ball valve for your particular application.
• Options: Can be configured fail open, or fail closed. Max +95C service using a mounting kit.

Electric atuated Brass 2 Way WRAS Ball Valve Modulating :

• Overview: All EU content actuated ball valve package. The brass ball valve is approved for use on drinking water by WRAS in the UK and designed for actuation with an integrallly cast ISO5211 actuator pad. 2 Way brass ball valve with BSP female treaded end connnections. Supplied fully assembled and dry bench function tested by J+J in Matlock, Derbyshire.
• Function: J3C-S DPS smart modulating electric actuators are designed to move proportional to an input control signal with power applied continuously. They provide an output signal as standard. Fails to pre-set position on loss of control signal, stays put on loss of external power.
• Sizing Criteria: J3CS Electrical modulating actuators have been sized on a wet service with a maximum pressure of 16 bar at max +70C. If your intended duty differs from this please contact us to confirm the correct actuated ball valve for your particular application.
• Options: Can be configured to stay put, fail open, or fail closed on loss of control signal. Stays put on loss of external power. Max +95C service using a mounting kit.

Electric atuated Brass 2 Way WRAS Ball Valve Failsafe Modulating :

• Overview: All EU content actuated ball valve package. The brass ball valve is approved for use on drinking water by WRAS in the UK and designed for actuation with an integrallly cast ISO5211 actuator pad. 2 Way brass ball valve with BSP female treaded end connnections. Supplied fully assembled and dry bench function tested by J+J in Matlock, Derbyshire.
• Function: J3C-S DPS BSR failsafe modulating smart electric actuators are designed to move proportional to an input control signal with power applied continuously. They provide an output signal as standard. Fails to pre-set position on loss of control signal, and on loss of external power. Designed to, and must have power applied continuously.
• Sizing Criteria: J3CS Electrical failsafe modulating actuators have been sized on a wet service with a maximum pressure of 16 bar at max +70C. If your intended duty differs from this please contact us to confirm the correct actuated ball valve for your particular application.
• Options: Can be configured to stay put, fail open, or fail closed on loss of control signal.
• Can be configured to fail open, or fail closed on loss of external power.
• Max +95C service using a mounting kit.

Electric Actuated GRPolypropylene Wafer Butterfly Valve On Off :

• Overview - Electrically actuated on-off wafer Pattern GRPP body butterfly valve, stainless steel disc, EPDM liner,
• Function - J3C-S on-off smart electric actuators are designed for power to open and power to close. Stays put on external power failure. Designed to have power applied continuously.
• Sizing Criteria - J3CS Electrical on-off actuators have been sized on media comPCtible with EPDM at a maximum pressure wet service
• Options - Viton liner.

Electric Actuated GRPolypropylene Wafer Butterfly Valve Failsafe :

• Overview - Electrically actuated failsafe wafer Pattern GRPP body butterfly valve, stainless steel disc, EPDM liner,
• Function - J3C-S BSR smart failsafe electric actuators are designed for power to open and power to close, but fails to pre-determined position on external power failure using an internal battery. Designed to have power applied continuously.
• Sizing Criteria - J3CS Electrical on-off actuators have been sized on media comPCtible with EPDM at a maximum pressure wet service
• Options - Viton liner.

Electric Actuated GRPolypropylene Wafer Butterfly Valve Modulating :

• Overview - Electrically actuated modulating wafer Pattern GRPP body butterfly valve, stainless steel disc, EPDM liner,
• Function - J3C-S DPS smart modulating electric actuators are designed to move proportional to an input control signal with power applied continuously. They provide an output signal as standard. Fails to pre-set position on loss of control signal, stays put on loss of external power.
• Sizing Criteria - J3CS Electrical on-off actuators have been sized on media comPCtible with EPDM at a maximum pressure wet service
• Options - Viton liner.

Electric Actuated GRPolypropylene Wafer Butterfly Valve Failsafe Modulating :

• Overview - Electrically actuated failsafe modulating wafer Pattern GRPP body butterfly valve, stainless steel disc, EPDM liner,
• Function - J3C-S DPS BSR failsafe modulating smart electric actuators are designed to move proportional to an input control signal with power applied continuously. They provide an output signal as standard. Fails to pre-set position on loss of control signal, and on loss of external power.
• Sizing Criteria - J3CS Electrical on-off actuators have been sized on media comPCtible with EPDM at a maximum pressure wet service
• Options - Viton liner.

Electric Actuated PVC Wafer Butterfly Valve On Off :

• Overview - Electrically actuated on-off wafer Pattern PVC butterfly valve, stainless steel disc, EPDM liner,
• Function - J3C-S on-off smart electric actuators are designed for power to open and power to close. Stays put on external power failure. Designed to have power applied continuously.
• Sizing Criteria - J3CS Electrical on-off actuators have been sized on media comPCtible with EPDM at a maximum pressure wet service
• Options - Viton liner

Electric Actuated PVC Wafer Butterfly Valve Failsafe :

• Overview - Electrically actuated failsafe wafer Pattern PVC butterfly valve, stainless steel disc, EPDM liner,
• Function - J3C-S BSR smart failsafe electric actuators are designed for power to open and power to close, but fails to pre-determined position on external power failure using an internal battery. Designed to have power applied continuously.
• Sizing Criteria - J3CS Electrical on-off actuators have been sized on media comPCtible with EPDM at a maximum pressure wet service
• Options - Viton liner

Electric Actuated PVC Wafer Butterfly Valve Modulating :

• Overview - Electrically actuated modulating wafer Pattern PVC butterfly valve, stainless steel disc, EPDM liner,
• Function - J3C-S DPS smart modulating electric actuators are designed to move proportional to an input control signal with power applied continuously. They provide an output signal as standard. Fails to pre-set position on loss of control signal, stays put on loss of external power.
• Sizing Criteria - J3CS Electrical on-off actuators have been sized on media comPCtible with EPDM at a maximum pressure wet service
• Options - Viton liner

Electric Actuated PVC Wafer Butterfly Valve Failsafe Modulating :

• Overview - Electrically actuated failsafe modulating wafer Pattern PVC butterfly valve, stainless steel disc, EPDM liner,
• Function - J3C-S DPS BSR failsafe modulating smart electric actuators are designed to move proportional to an input control signal with power applied continuously. They provide an output signal as standard. Fails to pre-set position on loss of control signal, and on loss of external power.
• Sizing Criteria - J3CS Electrical on-off actuators have been sized on media comPCtible with EPDM at a maximum pressure wet service
• Options - Viton liner

Electric Actuated PVC Wafer Butterfly Valve On Off :

• Overview - Electrically actuated on-off wafer Pattern PVC butterfly valve, stainless steel disc, EPDM liner,
• Function - J3C-S on-off smart electric actuators are designed for power to open and power to close. Stays put on external power failure. Designed to have power applied continuously.
• Sizing Criteria - J3CS Electrical on-off actuators have been sized on media comPCtible with EPDM at a maximum pressure wet service
• Options - Viton liner.

Electric Actuated PVC Wafer Butterfly Valve Failsafe :

• Overview - Electrically actuated failsafe wafer Pattern PVC butterfly valve, stainless steel disc, EPDM liner,
• Function - J3C-S BSR smart failsafe electric actuators are designed for power to open and power to close, but fails to pre-determined position on external power failure using an internal battery. Designed to have power applied continuously.
• Sizing Criteria - J3CS Electrical on-off actuators have been sized on media comPCtible with EPDM at a maximum pressure wet service
• Options - Viton liner.

Electric Actuated PVC Wafer Butterfly Valve Modulating :

• Overview - Electrically actuated modulating wafer Pattern PVC butterfly valve, stainless steel disc, EPDM liner,
• Function - J3C-S DPS smart modulating electric actuators are designed to move proportional to an input control signal with power applied continuously. They provide an output signal as standard. Fails to pre-set position on loss of control signal, stays put on loss of external power.
• Sizing Criteria - J3CS Electrical on-off actuators have been sized on media comPCtible with EPDM at a maximum pressure wet service
• Options - Viton liner.

Electric Actuated PVC Wafer Butterfly Valve Failsafe Modulating :

• Overview - Electrically actuated failsafe modulating wafer Pattern PVC butterfly valve, stainless steel disc, EPDM liner,
• Function - J3C-S DPS BSR failsafe modulating smart electric actuators are designed to move proportional to an input control signal with power applied continuously. They provide an output signal as standard. Fails to pre-set position on loss of control signal, and on loss of external power.
• Sizing Criteria - J3CS Electrical on-off actuators have been sized on media comPCtible with EPDM at a maximum pressure wet service
• Options - Viton liner.