Valves & Valve Fittings #1585739

Electric Actuated Stainless 3 Way GE Ball Valve On Off :

• Overview - The 3 way ball valve is designed for actuation with an integrallly cast ISO5211 actuator pad. GE reduced bore stainless steel ball valves with BSP female treaded end connnections are available as a 3 way L port for diverting duties ora 3 way T port for diverting or mixing duties. Supplied fully assembled and dry bench function tested by J+J in Matlock, Derbyshire.
• Function - J3C-S on-off smart electric actuators are designed for power to open and power to close. Stays put on external power failure. Designed to have power applied continuously.
• Sizing Criteria - J3CS Electrical on-off actuators have been sized on a wet service with a maximum pressure of 16bar at max +70C. If your intended duty differs from this please contact us to confirm the correct actuated ball valve for your particular application.
• Options - Available L port or T port. Max +130C service using a mounting kit.

Electric Actuated Stainless 3 Way GE Ball Valve Failsafe :

• Overview - The 3 way ball valve is designed for actuation with an integrallly cast ISO5211 actuator pad. GE reduced bore stainless steel ball valves with BSP female treaded end connnections are available as a 3 way L port for diverting duties ora 3 way T port for diverting or mixing duties. Supplied fully assembled and dry bench function tested by J+J in Matlock, Derbyshire.
• Function - J3C-S BSR smart failsafe electric actuators are designed for power to open and power to close, but fails to pre-determined position on external power failure using an internal battery. Designed to have power applied continuously.
• Sizing Criteria - J3CS Electrical failsafe actuators have been sized on a wet service with a maximum pressure of 16bar at max +70C. If your intended duty differs from this please contact us to confirm the correct actuated ball valve for your particular application.
• Options - Available L port or T port. Can be configured fail open, or fail closed. Max +130C service using a mounting kit.

Electric Actuated Stainless 3 Way GE Ball Valve Modulating :

• Overview - The 3 way ball valve is designed for actuation with an integrallly cast ISO5211 actuator pad. GE reduced bore stainless steel ball valves with BSP female treaded end connnections are available as a 3 way L port for diverting duties ora 3 way T port for diverting or mixing duties. Supplied fully assembled and dry bench function tested by J+J in Matlock, Derbyshire.
• Function - J3C-S DPS smart modulating electric actuators are designed to move proportional to an input control signal with power applied continuously. They provide an output signal as standard. Fails to pre-set position on loss of control signal, stays put on loss of external power.
• Sizing Criteria - J3CS Electrical modulating actuators have been sized on a wet service with a maximum pressure of 16bar at max +70C. If your intended duty differs from this please contact us to confirm the correct actuated ball valve for your particular application.
• Options - Available L port or T port. Can be configured to stay put, fail open, or fail closed on loss of control signal. Stays put on loss of external power. Max +130C service using a mounting kit.

Electric Actuated Stainless 3 Way GE Ball Valve Failsafe Modulating :

• Overview - The 3 way ball valve is designed for actuation with an integrallly cast ISO5211 actuator pad. GE reduced bore stainless steel ball valves with BSP female treaded end connnections are available as a 3 way L port for diverting duties ora 3 way T port for diverting or mixing duties. Supplied fully assembled and dry bench function tested by J+J in Matlock, Derbyshire.
• Function - J3C-S DPS BSR failsafe modulating smart electric actuators are designed to move proportional to an input control signal with power applied continuously. They provide an output signal as standard. Fails to pre-set position on loss of control signal, and on loss of external power.
• Sizing Criteria - J3CS Electrical failsafe modulating actuators have been sized on a wet service with a maximum pressure of 16bar at max +70C. If your intended duty differs from this please contact us to confirm the correct actuated ball valve for your particular application.
• Options - Available L port or T port. Can be configured to stay put, fail open, or fail closed on loss of control signal. Can be configured to fail open, or fail closed on loss of external power. Max +130C service using a mounting kit.

Electric Actuated 3 Way 6000psi Stainless Ball Valve On Off :

• Overview - The UK manufactured reduced bore stainless steel high pressure ball valve with BSPP female treaded end connnections is available as a 3 way L port for diverting duties or a 3 way T port for diverting or mixing duties. J3CS electrical acxtuator mounted via a stainless steel bracket and drive adapter.Supplied fully assembled and dry bench function tested by J+J in Matlock, Derbyshire.
• Function - J3C-S on-off smart electric actuators are designed for power to open and power to close. Stays put on external power failure. Designed to have power applied continuously.
• Sizing Criteria - J3CS Electrical on off actuators have been sized on a wet service with a maximum pressure of 16bar at max +70C. If your intended duty differs from this please contact us to confirm the correct actuated ball valve for your particular application.
• Options - Available L port or T port. Available as a bottom entry valve. BSPT, NPT or compression ends.

Electric Actuated 3 Way 6000psi Stainless Ball Valve Failsafe :

• Overview - The UK manufactured reduced bore stainless steel high pressure ball valve with BSPP female treaded end connnections is available as a 3 way L port for diverting duties or a 3 way T port for diverting or mixing duties. J3CS electrical acxtuator mounted via a stainless steel bracket and drive adapter.Supplied fully assembled and dry bench function tested by J+J in Matlock, Derbyshire.
• Function - J3C-S BSR smart failsafe electric actuators are designed for power to open and power to close, but fails to pre-determined position on external power failure using an internal battery. Designed to and must have power applied continuously.
• Sizing Criteria - J3CS Electrical failsafe actuators have been sized on a wet service with a maximum pressure of 6000psi at max +70C. If your intended duty differs from this please contact us to confirm the correct actuated ball valve for your particular application.
• Options - Available L port or T port. Available as bottom entry valve. Can be configured fail open, or fail closed. BSPT, NPT or compression ends.

Electric Actuated 3 Way 6000psi Stainless Ball Valve Modulating :

• Overview - Electrically actuated modulating reduced bore high pressure 6000psi stainless steel 3 way ball valve, ends BSPP,
• Function - J3C-S DPS smart modulating electric actuators are designed to move proportional to an input control signal with power applied continuously. They provide an output signal as standard. Fails to pre-set position on loss of control signal, stays put on loss of external power.
• Sizing Criteria - J3CS Electrical modulating actuators have been sized on a wet service with a maximum pressure of 16bar at max +70C. If your intended duty differs from this please contact us to confirm the correct actuated ball valve for your particular application.
• Options - Available L port or T port. Available as a bottom entry valve. Can be configured to stay put, fail open, or fail closed on loss of control signal. Stays put on loss of external power. BSPT, NPT or compression ends.

Electric Actuated 3 Way 6000psi Stainless Ball Valve Failsafe Modulating :

• Overview - The UK manufactured reduced bore stainless steel high pressure ball valve with BSPP female treaded end connnections is available as a 3 way L port for diverting duties or a 3 way T port for diverting or mixing duties. J3CS electrical acxtuator mounted via a stainless steel bracket and drive adapter.Supplied fully assembled and dry bench function tested by J+J in Matlock, Derbyshire.
• Function - J3C-S DPS BSR failsafe modulating smart electric actuators are designed to move proportional to an input control signal with power applied continuously. They provide an output signal as standard. Fails to pre-set position on loss of control signal, and on loss of external power.
• Sizing Criteria - J3CS Electrical failsafe modulating actuators have been sized on a wet service with a maximum pressure of 16bar at max +70C. If your intended duty differs from this please contact us to confirm the correct actuated ball valve for your particular application.
• Options - Available L port or T port. Available as bottom entry valve. Can be configured to stay put, fail open, or fail closed on loss of control signal. Can be configured to fail open, or fail closed on loss of external power. BSPT, NPT or compression ends.

Electric Actuated Stainless 3 Way Ball Valve On Off :

• Overview - The 3 way ball valve is designed for actuation with an integrallly cast ISO5211 actuator pad. Reduced bore stainless steel ball valve with BSP female treaded end connnections is available as a 3 way L port for diverting duties ora 3 way T port for diverting or mixing duties. Supplied fully assembled and dry bench function tested by J+J in Matlock, Derbyshire.
• Function - J3C-S on-off smart electric actuators are designed for power to open and power to close. Stays put on external power failure. Designed to have power applied continuously.
• Sizing Criteria - J3CS Electrical on-off actuators have been sized on a wet service with a maximum pressure of 16bar at max +70C. If your intended duty differs from this please contact us to confirm the correct actuated ball valve for your particular application.
• Options - Available L port or T port., Max +130C service using a mounting kit.

Electric Actuated Stainless 3 Way Ball Valve Failsafe :

• Overview - The 3 way ball valve is designed for actuation with an integrallly cast ISO5211 actuator pad. Reduced bore stainless steel ball valve with BSP female treaded end connnections is available as a 3 way L port for diverting duties ora 3 way T port for diverting or mixing duties. Supplied fully assembled and dry bench function tested by J+J in Matlock, Derbyshire.
• Function - J3C-S BSR smart failsafe electric actuators are designed for power to open and power to close, but fails to pre-determined position on external power failure using an internal battery. Designed to and must have power applied continuously.
• Sizing Criteria - J3CS Electrical failsafe actuators have been sized on a wet service with a maximum pressure of 16bar at max +70C. If your intended duty differs from this please contact us to confirm the correct actuated ball valve for your particular application.
• Options - Available L port or T port., Can be configured fail open, or fail closed., Max +130C service using a mounting kit.

Electric Actuated Stainless 3 Way Ball Valve Modulating :

• Overview - The 3 way ball valve is designed for actuation with an integrallly cast ISO5211 actuator pad. Reduced bore stainless steel ball valve with BSP female treaded end connnections is available as a 3 way L port for diverting duties ora 3 way T port for diverting or mixing duties. Supplied fully assembled and dry bench function tested by J+J in Matlock, Derbyshire.
• Function - J3C-S DPS smart modulating electric actuators are designed to move proportional to an input control signal with power applied continuously. They provide an output signal as standard. Fails to pre-set position on loss of control signal, stays put on loss of external power.
• Sizing Criteria - J3CS Electrical modulating actuators have been sized on a wet service with a maximum pressure of 16bar at max +70C. If your intended duty differs from this please contact us to confirm the correct actuated ball valve for your particular application.
• Options  - Available L port or T port. Can be configured to stay put, fail open, or fail closed on loss of control signal. Stays put on loss of external power. Max +130C service using a mounting kit.

Electric Actuated Stainless 3 Way Ball Valve Failsafe Modulating :

• Overview - The 3 way ball valve is designed for actuation with an integrallly cast ISO5211 actuator pad. Reduced bore stainless steel ball valve with BSP female treaded end connnections is available as a 3 way L port for diverting duties ora 3 way T port for diverting or mixing duties. Supplied fully assembled and dry bench function tested by J+J in Matlock, Derbyshire.
• Function - J3C-S DPS BSR failsafe modulating smart electric actuators are designed to move proportional to an input control signal with power applied continuously. They provide an output signal as standard. Fails to pre-set position on loss of control signal, and on loss of external power.
• Sizing Criteria - J3CS Electrical failsafe modulating actuators have been sized on a wet service with a maximum pressure of 16bar at max +70C. If your intended duty differs from this please contact us to confirm the correct actuated ball valve for your particular application.
• Options - Available L port or T port. Can be configured to stay put, fail open, or fail closed on loss of control signal. Can be configured to fail open, or fail closed on loss of external power. Max +130C service using a mounting kit.

Electric Actuated Stainless PN16 Ball Valve On Off :

• Overview - The 2 piece bolted contruction stainless steel ball valve is designed for actuation with an integrallly cast ISO5211 actuator pad and suitable for wide variety of service applications. 2 Way full bore stainless ball valve with PN16 flanged end connnections. Firesafe design but not approved. Supplied fully assembled and dry bench function tested by J+J in Matlock, Derbyshire.
• Function - J3C-S on-off smart electric actuators are designed for power to open and power to close. Stays put on external power failure. Designed to have power applied continuously.
• Sizing Criteria:J3CS Electrical on off actuators have been sized on a wet service with a maximum pressure of 16bar at max +70C. If your intended duty differs from this please contact us to confirm the correct actuated ball valve for your particular application.
• Options - Max +130C service using a mounting kit.

Electric Actuated Stainless PN16 Ball Valve Failsafe :

• Overview - The 2 piece bolted contruction stainless steel ball valve is designed for actuation with an integrallly cast ISO5211 actuator pad and suitable for wide variety of service applications. 2 Way full bore stainless ball valve with PN16 flanged end connnections. Firesafe design but not approved. Supplied fully assembled and dry bench function tested by J+J in Matlock, Derbyshire.
• Function - J3C-S BSR smart failsafe electric actuators are designed for power to open and power to close, but fails to pre-determined position on external power failure using an internal battery. Designed to and must have power applied continuously.
• Sizing Criteria - J3CS Electrical failsafe actuators have been sized on a wet service with a maximum pressure of 16bar at max +70C. If your intended duty differs from this please contact us to confirm the correct actuated ball valve for your particular application.
• Options - Can be configured fail open, or fail closed. Max +130C service using a mounting kit.

Electric Actuated Stainless PN16 Ball Valve Modulating :

• Overview - The 2 piece bolted contruction stainless steel ball valve is designed for actuation with an integrallly cast ISO5211 actuator pad and suitable for wide variety of service applications. 2 Way full bore stainless ball valve with PN16 flanged end connnections. Firesafe design but not approved. Supplied fully assembled and dry bench function tested by J+J in Matlock, Derbyshire.
• Function - J3C-S DPS smart modulating electric actuators are designed to move proportional to an input control signal with power applied continuously. They provide an output signal as standard. Fails to pre-set position on loss of control signal, stays put on loss of external power.
• Sizing Criteria - J3CS Electrical modulating actuators have been sized on a wet service with a maximum pressure of 16bar at max +70C. If your intended duty differs from this please contact us to confirm the correct actuated ball valve for your particular application.
• Options - Can be configured to stay put, fail open, or fail closed on loss of control signal. Stays put on loss of external power. Max +130C service using a mounting kit.

Electric Actuated Stainless PN16 Ball Valve Failsafe modulating :

• Overview - The 2 piece bolted contruction stainless steel ball valve is designed for actuation with an integrallly cast ISO5211 actuator pad and suitable for wide variety of service applications. 2 Way full bore stainless ball valve with PN16 flanged end connnections. Firesafe design but not approved. Supplied fully assembled and dry bench function tested by J+J in Matlock, Derbyshire.
• Function - J3C-S DPS BSR failsafe modulating smart electric actuators are designed to move proportional to an input control signal with power applied continuously. They provide an output signal as standard. Fails to pre-set position on loss of control signal, and on loss of external power.
• Sizing Criteria - J3CS Electrical failsafe modulating actuators have been sized on a wet service with a maximum pressure of 16bar at max +70C. If your intended duty differs from this please contact us to confirm the correct actuated ball valve for your particular application.
• Options - Can be configured to stay put, fail open, or fail closed on loss of control signal. Can be configured to fail open, or fail closed on loss of external power. Max +130C service using a mounting kit.

Electric Actuated Stainless PN16 firesafe Ball Valve On Off :

• Overview - The 2 piece bolted contruction anti-static stainless steel ball valve is designed for actuation with an integrallly cast ISO5211 actuator pad and suitable for wide variety of service applications. 2 Way full bore stainless ball valve with PN16 flanged end connnections. Firesafe tested and approved. Supplied fully assembled and dry bench function tested by J+J in Matlock, Derbyshire.
• Function - J3C-S on-off smart electric actuators are designed for power to open and power to close. Stays put on external power failure. Designed to have power applied continuously.
• Sizing Criteria - J3CS Electrical on-off actuators have been sized on a wet service with a maximum pressure of 16bar at max +70C. If your intended duty differs from this please contact us to confirm the correct actuated ball valve for your particular application.
• Options - Max +130C service using a mounting kit.

Electric Actuated Stainless PN16 firesafe Ball Valve Failsafe :

• Overview - The 2 piece bolted contruction anti-static stainless steel ball valve is designed for actuation with an integrallly cast ISO5211 actuator pad and suitable for wide variety of service applications. 2 Way full bore stainless ball valve with PN16 flanged end connnections. Firesafe tested and approved. Supplied fully assembled and dry bench function tested by J+J in Matlock, Derbyshire.
• Function - J3C-S BSR smart failsafe electric actuators are designed for power to open and power to close, but fails to pre-determined position on external power failure using an internal battery. Designed to have power applied continuously.
• Sizing Criteria - J3CS Electrical failsafe actuators have been sized on a wet service with a maximum pressure of 16bar at max +70C. If your intended duty differs from this please contact us to confirm the correct actuated ball valve for your particular application.
• Options - Can be configured fail open, or fail closed. Max +130C service using a mounting kit.

Electric Actuated Stainless PN16 firesafe Ball Valve Modulating :

• Overview - The 2 piece bolted contruction anti-static stainless steel ball valve is designed for actuation with an integrallly cast ISO5211 actuator pad and suitable for wide variety of service applications. 2 Way full bore stainless ball valve with PN16 flanged end connnections. Firesafe tested and approved. Supplied fully assembled and dry bench function tested by J+J in Matlock, Derbyshire.
• Function - J3C-S DPS smart modulating electric actuators are designed to move proportional to an input control signal with power applied continuously. They provide an output signal as standard. Fails to pre-set position on loss of control signal, stays put on loss of external power.
• Sizing Criteria - J3CS Electrical modulating actuators have been sized on a wet service with a maximum pressure of 16bar at max +70C. If your intended duty differs from this please contact us to confirm the correct actuated ball valve for your particular application.
• Options - Can be configured to stay put, fail open, or fail closed on loss of control signal. Stays put on loss of external power. Max +130C service using a mounting kit.

Electric Actuated Stainless PN16 firesafe Ball Valve Failsafe modulating :

• Overview - The 2 piece bolted contruction anti-static stainless steel ball valve is designed for actuation with an integrallly cast ISO5211 actuator pad and suitable for wide variety of service applications. 2 Way full bore stainless ball valve with PN16 flanged end connnections. Firesafe tested and approved. Supplied fully assembled and dry bench function tested by J+J in Matlock, Derbyshire.
• Function - J3C-S DPS BSR failsafe modulating smart electric actuators are designed to move proportional to an input control signal with power applied continuously. They provide an output signal as standard. Fails to pre-set position on loss of control signal, and on loss of external power.
• Sizing Criteria - J3CS Electrical failsafe modulating actuators have been sized on a wet service with a maximum pressure of 16bar at max +70C. If your intended duty differs from this please contact us to confirm the correct actuated ball valve for your particular application.
• Options - Can be configured to stay put, fail open, or fail closed on loss of control signal. Can be configured to fail open, or fail closed on loss of external power. Max +130C service using a mounting kit.

Electric Actuated Cast Iron Wafer Butterfly Valve On Off :

• Overview - Electrically actuated on-off wafer Pattern cast iron butterfly valve, stainless steel disc, EPDM liner,
• Function - J3C-S on-off smart electric actuators are designed for power to open and power to close. Stays put on external power failure. Designed to have power applied continuously.
• Sizing Criteria - J3CS Electrical on-off actuators have been sized on media comPCtible with EPDM at a maximum pressure wet service
• Options :
  • Alternative liners to suit different media.
  • Typically NBR, Viton, Silicon.
  • PTFE liner versions available.
  • Higher temperatures possible using a mounting kit but are liner and application dependant.

Electric Actuated Cast Iron Wafer Butterfly Valve Failsafe :

• Overview - Electrically actuated failsafe wafer Pattern cast iron butterfly valve, stainless steel disc, EPDM liner,
• Function - J3C-S BSR smart failsafe electric actuators are designed for power to open and power to close, but fails to pre-determined position on external power failure using an internal battery. Designed to have power applied continuously.
• ower applied continuously.
• Sizing Criteria - J3CS Electrical on-off actuators have been sized on media comPCtible with EPDM at a maximum pressure wet service
• Options :
  • Alternative liners to suit different media.
  • Typically NBR, Viton, Silicon.
  • PTFE liner versions available.
  • Higher temperatures possible using a mounting kit but are liner and application dependant.

Electric Actuated Cast Iron Wafer Butterfly Valve Modulating :

• Overview - Electrically actuated modulating wafer Pattern cast iron butterfly valve, stainless steel disc, EPDM liner,
• Function - J3C-S DPS smart modulating electric actuators are designed to move proportional to an input control signal with power applied continuously. They provide an output signal as standard. Fails to pre-set position on loss of control signal, stays put on loss of external power.
• Sizing Criteria - J3CS Electrical on-off actuators have been sized on media comPCtible with EPDM at a maximum pressure wet service
• Options :
  • Alternative liners to suit different media.
  • Typically NBR, Viton, Silicon.
  • PTFE liner versions available.
  • Higher temperatures possible using a mounting kit but are liner and application dependant.

Electric Actuated Cast Iron Wafer Butterfly Valve Failsafe Modulating :

• Overview - Electrically actuated failsafe modulating wafer Pattern cast iron butterfly valve, stainless steel disc, EPDM liner,
• Function - J3C-S DPS BSR failsafe modulating smart electric actuators are designed to move proportional to an input control signal with power applied continuously. They provide an output signal as standard. Fails to pre-set position on loss of control signal, and on loss of external power.
• Sizing Criteria - J3CS Electrical on-off actuators have been sized on media comPCtible with EPDM at a maximum pressure wet service

• Options :
  • Alternative liners to suit different media.
  • Typically NBR, Viton, Silicon.
  • PTFE liner versions available.
  • Higher temperatures possible using a mounting kit but are liner and application dependant.

Electric Actuated Stainless PN16 3 WayBall Valve On Off :

• Overview - This full bore 3 way stainless steel ball valve is suitable for a wide variety of service applications. L port ot T port 3 Way ball valve with one piece semi-trunion ball and stem, PTFE seats and seals and PN16 flanged end connections. Supplied fully assembled and dry bench function tested by J+J in Matlock, Derbyshire.
• Function - J3C-S on-off smart electric actuators are designed for power to open and power to close. Stays put on external power failure. Designed to have power applied continuously.
• Sizing Criteria - J3CS Electrical on-off actuators have been sized on a wet service with a maximum pressure of 16bar at max +70C. If your intended duty differs from this please contact us to confirm the correct actuated ball valve for your particular application.
• Options - Available L port or T port. Max +130C service using a mounting kit.

Electric Actuated Stainless PN16 3 Way Ball Valve Failsafe :

• Overview - This full bore 3 way stainless steel ball valve is suitable for a wide variety of service applications. L port ot T port 3 Way ball valve with one piece semi-trunion ball and stem, PTFE seats and seals and PN16 flanged end connections. Supplied fully assembled and dry bench function tested by J+J in Matlock, Derbyshire.
• Function - J3C-S BSR smart failsafe electric actuators are designed for power to open and power to close, but fails to pre-determined position on external power failure using an internal battery. Designed to have power applied continuously.
• Sizing Criteria - J3CS Electrical failsafe actuators have been sized on a wet service with a maximum pressure of 16bar at max +70C. If your intended duty differs from this please contact us to confirm the correct actuated ball valve for your particular application.
• Options - Available L port or T port. Can be configured fail open, or fail closed. Max +130C service using a mounting kit.

Electric Actuated Stainless PN16 3 Way Ball Valve Modulating :

• Overview - This full bore 3 way stainless steel ball valve is suitable for a wide variety of service applications. L port ot T port 3 Way ball valve with one piece semi-trunion ball and stem, PTFE seats and seals and PN16 flanged end connections. Supplied fully assembled and dry bench function tested by J+J in Matlock, Derbyshire.
• Function - J3C-S DPS smart modulating electric actuators are designed to move proportional to an input control signal with power applied continuously. They provide an output signal as standard. Fails to pre-set position on loss of control signal, stays put on loss of external power.
• Sizing Criteria - J3CS Electrical modulating actuators have been sized on a wet service with a maximum pressure of 16bar at max +70C. If your intended duty differs from this please contact us to confirm the correct actuated ball valve for your particular application.
• Options - Available L port or T port. Can be configured to stay put, fail open, or fail closed on loss of control signal. Stays put on loss of external power. Max +130C service using a mounting kit.

Electric Actuated Stainless PN16 3 Way Ball Valve Failsafe Modulating :

• Overview - This full bore 3 way stainless steel ball valve is suitable for a wide variety of service applications. L port ot T port 3 Way ball valve with one piece semi-trunion ball and stem, PTFE seats and seals and PN16 flanged end connections. Supplied fully assembled and dry bench function tested by J+J in Matlock, Derbyshire.
• Function - J3C-S DPS BSR failsafe modulating smart electric actuators are designed to move proportional to an input control signal with power applied continuously. They provide an output signal as standard. Fails to pre-set position on loss of control signal, and on loss of external power.
• Sizing Criteria - J3CS Electrical failsafe modulating actuators have been sized on a wet service with a maximum pressure of 16bar at max +70C. If your intended duty differs from this please contact us to confirm the correct actuated ball valve for your particular application.
• Options - Available L port or T port. Can be configured to stay put, fail open, or fail closed on loss of control signal. Can be configured to fail open, or fail closed on loss of external power. Max +130C service using a mounting kit.

Electric Actuated Stainless ASA150 3 Way Ball Valve On Off :

• Overview - This full bore 3 way stainless steel ball valve is suitable for a wide variety of service applications. L port ot T port 3 Way ball valve with one piece semi-trunion ball and stem, PTFE seats and seals and ASA150 flanged end connections. Supplied fully assembled and dry bench function tested by J+J in Matlock, Derbyshire.
• Function - J3C-S on-off smart electric actuators are designed for power to open and power to close. Stays put on external power failure. Designed to have power applied continuously.
• Sizing Criteria - J3CS Electrical failsafe actuators have been sized on a wet service with a maximum pressure of 16bar at max +70C. If your intended duty differs from this please contact us to confirm the correct actuated ball valve for your particular application.
• Options - Available L port or T port. Max +130C service using a mounting kit.

Electric Actuated Stainless ASA150 3 Way Ball Valve Failsafe :

• Overview - This full bore 3 way stainless steel ball valve is suitable for a wide variety of service applications. L port ot T port 3 Way ball valve with one piece semi-trunion ball and stem, PTFE seats and seals and ASA150 flanged end connections. Supplied fully assembled and dry bench function tested by J+J in Matlock, Derbyshire.
• Function - J3C-S BSR smart failsafe electric actuators are designed for power to open and power to close, but fails to pre-determined position on external power failure using an internal battery. Designed to have power applied continuously.
• Sizing Criteria - J3CS Electrical failsafe actuators have been sized on a wet service with a maximum pressure of 16bar at max +70C. If your intended duty differs from this please contact us to confirm the correct actuated ball valve for your particular application.
• Options - Available L port or T port. Can be configured fail open, or fail closed. Max +130C service using a mounting kit.

Electric Actuated Stainless ASA150 3 Way Ball Valve Modulating :

• Overview - This full bore 3 way stainless steel ball valve is suitable for a wide variety of service applications. L port ot T port 3 Way ball valve with one piece semi-trunion ball and stem, PTFE seats and seals and ASA150 flanged end connections. Supplied fully assembled and dry bench function tested by J+J in Matlock, Derbyshire.
• Function - J3C-S DPS smart modulating electric actuators are designed to move proportional to an input control signal with power applied continuously. They provide an output signal as standard. Fails to pre-set position on loss of control signal, stays put on loss of external power.
• Sizing Criteria - J3CS Electrical modulating actuators have been sized on a wet service with a maximum pressure of 16bar at max +70C. If your intended duty differs from this please contact us to confirm the correct actuated ball valve for your particular application.
• Options - Available L port or T port. Can be configured to stay put, fail open, or fail closed on loss of control signal. Stays put on loss of external power. Max +130C service using a mounting kit.

Electric Actuated Stainless ASA150 3 Way Ball Valve Failsafe modulating :

• Overview - This full bore 3 way stainless steel ball valve is suitable for a wide variety of service applications. L port ot T port 3 Way ball valve with one piece semi-trunion ball and stem, PTFE seats and seals and ASA150 flanged end connections. Supplied fully assembled and dry bench function tested by J+J in Matlock, Derbyshire.
• Function - J3C-S DPS BSR failsafe modulating smart electric actuators are designed to move proportional to an input control signal with power applied continuously. They provide an output signal as standard. Fails to pre-set position on loss of control signal, and on loss of external power.
• Sizing Criteria - J3CS Electrical failsafe modulating actuators have been sized on a wet service with a maximum pressure of 16bar at max +70C. If your intended duty differs from this please contact us to confirm the correct actuated ball valve for your particular application.
• Options - Available L port or T port. Can be configured to stay put, fail open, or fail closed on loss of control signal. Can be configured to fail open, or fail closed on loss of external power. Max +130C service using a mounting kit.

Electric Actuated Stainless ASA150 3 Way Ball Valve On Off :

• Overview: This full bore 3 way stainless steel ball valve is suitable for a wide variety of service applications. L port ot T port 3 Way ball valve with one piece semi-trunion ball and stem, PTFE seats and seals and ASA150 flanged end connections. Supplied fully assembled and dry bench function tested by J+J in Matlock, Derbyshire.
• Function: J3C-S on-off smart electric actuators are designed for power to open and power to close. Stays put on external power failure. Designed to have power applied continuously.
• Sizing Criteria: J3CS Electrical failsafe actuators have been sized on a wet service with a maximum pressure of 16bar at max +70C. If your intended duty differs from this please contact us to confirm the correct actuated ball valve for your particular application.

• Options :
  • Available L port or T port.
  • Max +130C service using a mounting kit.

Electric Actuated Stainless ASA150 3 Way Ball Valve Failsafe :

• Overview: This full bore 3 way stainless steel ball valve is suitable for a wide variety of service applications. L port ot T port 3 Way ball valve with one piece semi-trunion ball and stem, PTFE seats and seals and ASA150 flanged end connections. Supplied fully assembled and dry bench function tested by J+J in Matlock, Derbyshire.
• Function: J3C-S BSR smart failsafe electric actuators are designed for power to open and power to close, but fails to pre-determined position on external power failure using an internal battery. Designed to have power applied continuously.
• Sizing Criteria: J3CS Electrical failsafe actuators have been sized on a wet service with a maximum pressure of 16bar at max +70C. If your intended duty differs from this please contact us to confirm the correct actuated ball valve for your particular application.

• Options :
  • Available L port or T port.
  • Can be configured fail open, or fail closed.
  • Max +130C service using a mounting kit.

Electric Actuated Stainless ASA150 3 Way Ball Valve Modulating :

• Overview: This full bore 3 way stainless steel ball valve is suitable for a wide variety of service applications. L port ot T port 3 Way ball valve with one piece semi-trunion ball and stem, PTFE seats and seals and ASA150 flanged end connections. Supplied fully assembled and dry bench function tested by J+J in Matlock, Derbyshire.
• Function: J3C-S DPS smart modulating electric actuators are designed to move proportional to an input control signal with power applied continuously. They provide an output signal as standard. Fails to pre-set position on loss of control signal, stays put on loss of external power.
• Sizing Criteria: J3CS Electrical modulating actuators have been sized on a wet service with a maximum pressure of 16bar at max +70C. If your intended duty differs from this please contact us to confirm the correct actuated ball valve for your particular application.

• Options :
  • Available L port or T port.
  • Can be configured to stay put, fail open, or fail closed on loss of control signal.
  • Stays put on loss of external power.
  • Max +130C service using a mounting kit.

Electric Actuated Stainless ASA150 3 Way Ball Valve Failsafe modulating :

• Overview: This full bore 3 way stainless steel ball valve is suitable for a wide variety of service applications. L port ot T port 3 Way ball valve with one piece semi-trunion ball and stem, PTFE seats and seals and ASA150 flanged end connections. Supplied fully assembled and dry bench function tested by J+J in Matlock, Derbyshire.
• Function: J3C-S DPS BSR failsafe modulating smart electric actuators are designed to move proportional to an input control signal with power applied continuously. They provide an output signal as standard. Fails to pre-set position on loss of control signal, and on loss of external power.
• Sizing Criteria: J3CS Electrical failsafe modulating actuators have been sized on a wet service with a maximum pressure of 16bar at max +70C. If your intended duty differs from this please contact us to confirm the correct actuated ball valve for your particular application.

• Options :
  • Available L port or T port.
  • Can be configured to stay put, fail open, or fail closed on loss of control signal.
  • Can be configured to fail open, or fail closed on loss of external power.
  • Max +130C service using a mounting kit.